Datasheet4U Logo Datasheet4U.com

MAX20070 - Integrated TFT Power Supplies and LED Backlight Drivers

Description

The MAX20070/MAX20070B are highly integrated power supplies and LED backlight drivers for automotive TFT-LCD applications.

Features

  • Integrates Both TFT Power Supplies and LED Backlight Driver in One IC, Reducing Component Count.
  • Alleviates EMI Due to Spread Spectrum on Both Source Driver Supplies and LED Driver.
  • 10000:1 Dimming Ratio at 200Hz Dimming Frequency.
  • Available in a 32-Pin (5mm x 5mm) TQFN with an Exposed Pad for Heat Dissipation and Operates Over the -40°C to +105°C Ambient Temperature Range Ordering Information appears at end of data sheet. Simplified Operating Circuit D3.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX200 RS-232 Transceivers Maxim
MAX20011E Automotive Single 8A Step-Down Converters Analog Devices
MAX20011F Automotive Single 12A Step-Down Converters Analog Devices
MAX20011G Automotive Single 16A Step-Down Converters Analog Devices
MAX2003 NiCd/NiMH Battery Fast-Charge Controllers Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX20070B Integrated TFT Power Supplies and LED Backlight Drivers
MAX20002 2A/3A Fully Integrated Step-Down Converters
MAX20003 2A/3A Fully Integrated Step-Down Converters
MAX20021 Step-Down DC-DC Converters
MAX20022 Step-Down DC-DC Converters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX20070/MAX20070B EVALUATION KIT AVAILABLE Integrated TFT Power Supplies and LED Backlight Drivers General Description The MAX20070/MAX20070B are highly integrated power supplies and LED backlight drivers for automotive TFT-LCD applications. The devices integrate one buckboost converter, one boost converter, two gate-driver supplies, and a boost/SEPIC converter that can power one to two strings of LEDs in the display backlight. The source-driver power supplies consist of a boost converter and an inverting buck-boost converter that can generate voltages up to +15V and -15V. Both sourcedriver power supplies can deliver up to 100mA. The positive source-driver supply regulation voltage (VPOS) is set by connecting an external resistor-divider on FBP.
Published: |