Datasheet4U Logo Datasheet4U.com

MAX2029 - 815MHz to 1000MHz Upconversion/Downconversion Mixer

Description

The MAX2029 high-linearity passive upconverter or downconverter mixer is designed to provide +36.5dBm IIP3, 6.7dB NF, and 6.5dB conversion loss for an 815MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications.

Features

  • 815MHz to 1000MHz RF Frequency Range.
  • 570MHz to 900MHz LO Frequency Range.
  • 960MHz to 1180MHz LO Frequency Range (Refer to the MAX2031 Data Sheet).
  • DC to 250MHz IF Frequency Range.
  • 6dB/6.5dB (Upconverter/Downconverter) Conversion Loss.
  • 36.5dBm/39dBm (Downconverter/Upconverter) Input IP3.
  • +25dBm/+27dBm (Upconverter/Downconverter) Input 1dB Compression Point.
  • 6.7dB Noise Figure.
  • Integrated LO Buffer.
  • Integrat.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX202 5-V Dual RS-232 Line Driver/Receiver Texas Instruments
MAX202 +5V-Powered / Multichannel RS-232 Drivers/Receivers Maxim
MAX2021 High Dynamic Range Direct Up/Down Conversion Quadrature Mod/Demod Maxim Integrated Products
MAX2023 High Dynamic Range Direct Up-/Down Conversion Maxim Integrated Products
MAX202C 5-V Dual RS-232 Line Driver/Receiver Texas Instruments

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX2022 Direct Up/Downconversion 1500MHz to 3000MHz Quadrature Modulator/Demodulator
MAX2027 IF Digitally Controlled Variable-Gain Amplifier
MAX20002 2A/3A Fully Integrated Step-Down Converters
MAX20003 2A/3A Fully Integrated Step-Down Converters
MAX20021 Step-Down DC-DC Converters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1017; Rev 0; 10/07 MAX2029 High-Linearity, 815MHz to 1000MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch General Description The MAX2029 high-linearity passive upconverter or downconverter mixer is designed to provide +36.5dBm IIP3, 6.7dB NF, and 6.5dB conversion loss for an 815MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications. With a 570MHz to 900MHz LO frequency range, this particular mixer is ideal for low-side LO injection architectures. For a pin-to-pin-compatible mixer meant for high-side LO injection, refer to the MAX2031 data sheet. In addition to offering excellent linearity and noise performance, the MAX2029 also yields a high level of component integration.
Published: |