MAX20313–MAX20316
500mA to 6A Adjustable
Current-Limit Switches
Absolute Maximum Ratings
(All voltages referenced to GND.)
Operating Temperature Range............................ -40°C to +85°C
IN, OUT, EN, EN, FLAG, SETI.................................-0.3V to +6V
Junction Temperature.......................................................+150°C
Continuous Current Into Any Terminal (except IN, OUT)....20mA
Storage Temperature Range............................. -65°C to +150°C
OUT Short Circuit to GND.................................Internally Limited
Soldering Temperature (reflow)........................................+260°C
Continuous Power Dissipation (TA = +70°C)
WLP (derate 13.73mW/°C above +70°C)................1098.4mW
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Package Information
PACKAGE TYPE: 12 WLP
Package Code
Outline Number
Land Pattern Number
THERMAL RESISTANCE, FOUR-LAYER BOARD
Junction to Ambient (θJA)
W121K1+1
21-100118
Refer to Application Note 1891
72.82°C/W
For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that
a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the
drawing pertains to the package regardless of RoHS status.
Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board.
For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial.
Electrical Characteristics
(VIN = 2.5V to 5.5V, TA = -40°C to +85°C, unless otherwise noted. Typical values are at VIN = 4.3V, CIN = 1µF, COUT = 1µF,
TA = +25°C) (Note 1)
PARAMETER
SUPPLY OPERATION
Operating Voltage
Undervoltage Lockout
Quiescent Current
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
VIN 2.5 5.5
VUVLO
1.45
IQ
IOUT = 0A, switch on, (supply current comes
from high voltage between IN and OUT)
250 525
V
V
µA
Latchoff Current
ILATCH
VIN = 4.3V, IOUT = 0A, after an
overcurrent fault (MAX20314,
MAX20316)
3.5 20
µA
Shutdown Forward Current
Shutdown Reverse Current
INTERNAL FET
Switch-on Resistance (Note 2)
Forward Current Limit (Note 2)
ISHDN
IRSHDN
VEN = 0V, VEN = VIN, VIN = 5.5V,
VOUT = 0V
VEN = 0V, VEN = VOUT, VIN = 0V,
VOUT = 5.5V
RON
ILIM
VIN = 4.3V, IOUT = 1A, IOUT < ILIM,
TA = +25ºC
RSETI = 680Ω, VIN = 4.3V
RSETI = 2050Ω, VIN = 4.3V
RSETI = 8350Ω, VIN = 4.3V
3.0 20
3.0 20
µA
µA
5700
1900
425
10
6000
2000
500
19
6300
2100
575
mΩ
mA
www.maximintegrated.com
Maxim Integrated │ 2