Datasheet4U Logo Datasheet4U.com

MAX22502E - 100Mbps Full-Duplex RS-485/RS-422 Transceiver

Description

The MAX22502E full-duplex, ESD-protected, RS-485/ RS-422 transceiver is optimized for high-speed (up to 100Mbps) communication over long cables.This transceiver

Features

  • larger receiver hysteresis for high noise rejection and improved signal integrity. Integrated preemphasis circuitry extends the distance, and increases the data rate, of reliable communication by reducing inter-symbol interference (ISI) caused by long cables when supplied with 5V. Integrated hot-swap protection and a fail-safe receiver ensure a logic-high on the receiver output when input signals are shorted or open for longer than 10μs (typ). The MAX22502E is available in a 12-pin TDFN-EP (3mm.

📥 Download Datasheet

Datasheet preview – MAX22502E

📁 Similar Datasheet

  • MAX225 - +5V-Powered / Multichannel RS-232 Drivers/Receivers (Maxim)
  • MAX22514 - Surge Protected IO-Link Transceiver (Analog Devices)
  • MAX22516 - IO-Link Data Link Controller (Analog Devices)
  • MAX22530 - 4-Channel 12-bit Isolated ADC (Analog Devices)
  • MAX22531 - 4-Channel 12-bit Isolated ADC (Analog Devices)
  • MAX22532 - 4-Channel 12-bit Isolated ADC (Analog Devices)
  • MAX220 - +5V-Powered Multichannel RS-232 Drivers/Receivers (MAXIM)
  • MAX2203 - RMS Power Detector (Maxim Integrated Products)
  • MAX2204 - RF Power Detector (Maxim Integrated Products)
  • MAX2205 - RF Power Detectors (Maxim)
Other Datasheets by Maxim Integrated
  • MAX22500E - 100Mbps Half-Duplex RS-485/RS-422 Transceivers
  • MAX22501E - 100Mbps Half-Duplex RS-485/RS-422 Transceivers
  • MAX22505 - High-Speed USB Port Protector
  • MAX22513 - Surge Protected Dual Driver IO-Link Device Transceiver
  • MAX2202 - RMS Power Detector
  • MAX2206 - RF Power Detectors
  • MAX2207 - RF Power Detectors
  • MAX22190 - Octal Industrial Digital Input

Full PDF Text Transcription

Click to expand full text
Click here for production status of specific part numbers. MAX22502E EVALUATION KIT AVAILABLE 100Mbps Full-Duplex RS-485/RS-422 Transceiver for Long Cables General Description The MAX22502E full-duplex, ESD-protected, RS-485/ RS-422 transceiver is optimized for high-speed (up to 100Mbps) communication over long cables.This transceiver features larger receiver hysteresis for high noise rejection and improved signal integrity. Integrated preemphasis circuitry extends the distance, and increases the data rate, of reliable communication by reducing inter-symbol interference (ISI) caused by long cables when supplied with 5V. Integrated hot-swap protection and a fail-safe receiver ensure a logic-high on the receiver output when input signals are shorted or open for longer than 10μs (typ).
Published: |