MAX3059 - Low Supply Current CAN Transceivers

Product Overview

Maxim Integrated

Part number	MAX3059
Manufacturer	Maxim Integrated
File Size	221.49 KB
Description	Low Supply Current CAN Transceivers
Datasheet	MAX3059 Datasheet
Note	This datasheet PDF includes multiple part numbers: MAX3059, MAX3058. Please refer to the document for exact specifications by model.
Additional preview pages of the MAX3059 datasheet.

The MAX3058/MAX3059 interface between the controller area network (CAN) protocol controller and the physical wires of the bus lines in a CAN.

four different modes of operation: high speed, slope control, standby, and shutdown. The MAX3059 features three different modes of operation: high speed, slope control, and shutdown. Highspeed mode allows data rates up to 1Mbps. In slope-control mode, the slew rate may be optimized for data rates up to 500kbps, so the effects of EMI are reduced, and unshielded twisted or parallel cable can be used. In standby mode, the transmitters are shut off and the receivers are put into low-current mode. In.

📁 Similar Datasheet

MAX3050 - Low-Supply Current CAN Transceivers (Maxim)
MAX3051 - Low-Supply-Current CAN Transceiver (Maxim)
MAX3053 - Low Supply Current CAN Transceiver (Maxim)
MAX3054 - Fault-Protected/Tolerant CAN Transceiver (Maxim)
MAX3057 - Low-Supply Current CAN Transceivers (Maxim)
MAX30003 - Single-Channel Integrated Biopotential AFE (Analog Devices)
MAX30009 - Bioimpedance Analog Front-End (Analog Devices)
MAX3000E - +1.2V to +5.5V / 15kV ESD-Protected / 0.1A / 35Mbps / 8-Channel Level Translators (Maxim)

Other Datasheets by Maxim Integrated

Published: Feb 7, 2020 |