Download the MAX3079E datasheet PDF.
This datasheet also covers the MAX3071E variant, as both devices belong to the same rs-485/rs-422 transceivers family and are provided as variant models within a single manufacturer datasheet.
General Description
The MAX3070E
MAX3079E 3.3V, ±15kV ESD-protected, RS-485/RS-422 transceivers feature one driver and one receiver.
These devices include fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted.
Key Features
independently programmable receiver and transmitter output phase through separate pins. The MAX3070E.
MAX3079E transceivers draw 800μA of supply current when unloaded, or when fully loaded with the drivers disabled. All devices have a 1/8-unit load receiver input impedance, allowing up to 256 transceivers on the bus.
Full PDF Text Transcription for MAX3079E (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
MAX3079E. For precise diagrams, and layout, please refer to the original PDF.
MAX3070E–MAX3079E +3.3V, ±15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers General Description The MAX3070E–MAX3079E 3.3V, ±15kV ESD-protected, RS-485/...
View more extracted text
l Description The MAX3070E–MAX3079E 3.3V, ±15kV ESD-protected, RS-485/RS-422 transceivers feature one driver and one receiver. These devices include fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logic-high if all transmitters on a terminated bus are disabled (high impedance). The devices include a hot-swap capability to eliminate false transitions on the bus during power-up or hot insertion. The MAX3070E/MAX3071E/MAX3072E feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowin
More Datasheets from Maxim Integrated (now Analog Devices)
MAX3079E Datasheet
