Datasheet4U Logo Datasheet4U.com

MAX34408 - SMBus Dual/Quad Current Monitor

Description

The MAX34408/MAX34409 are two- and four-channel current monitors that are configured and monitored with a standard I2C/SMBus serial interface.

Each unidirectional current sensor offers precision high-side operation with a low full-scale sense voltage.

Features

  • Enables Accurate Current Consumption Measurement on Up to Four Rails with Digital Serial Readout.
  • Low 12.25mV Full-Scale Current-Sense Voltage.
  • Automatic Round Robin Sequencing to Sample Each Current-Sense Input.
  • Selectable Averaging to Improve Current-Sense Accuracy.
  • Programmable Digital Overcurrent Thresholds with Delay Function.
  • I2C/SMBus Interface with Bus Timeout.
  • Register Access to Real-Time Current Measurements.
  • Comp.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX34406 Quad Current-Sense Amplifier Maxim Integrated Products
MAX3440E 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers Maxim
MAX3441E 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers Maxim
MAX3442E 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers Maxim
MAX3443E 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX34409 SMBus Dual/Quad Current Monitor
MAX34417 SMBus Four-Channel High Dynamic Range Power Accumulator
MAX34440 PMBus 6-Channel Power-Supply Manager
MAX34446 PMBus Power-Supply Data Logger
MAX34451 PMBus 16-Channel V/I Monitor and 12-Channel Sequencer/Marginer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX34408/MAX34409 EVALUATION KIT AVAILABLE SMBus Dual/Quad Current Monitor General Description The MAX34408/MAX34409 are two- and four-channel current monitors that are configured and monitored with a standard I2C/SMBus serial interface. Each unidirectional current sensor offers precision high-side operation with a low full-scale sense voltage. The devices automatically sequence through two or four channels and collect the current-sense samples and average them to reduce the effect of impulse noise. The raw ADC samples are compared to user-programmable digital thresholds to indicate overcurrent conditions. Overcurrent conditions trigger a hardware output to provide an immediate indication to shut down any necessary external circuitry.
Published: |