Datasheet4U Logo Datasheet4U.com

MAX4029 - 2:1 Video Multiplexer-Amplifiers

This page provides the datasheet information for the MAX4029, a member of the MAX4028 2:1 Video Multiplexer-Amplifiers family.

Description

The MAX4028/MAX4029 are 5V, triple/quad, 2:1 voltagefeedback multiplexer-amplifiers with input clamps and a fixed gain of +2V/V (6dB).

📥 Download Datasheet

Datasheet preview – MAX4029

Datasheet Details

Part number MAX4029
Manufacturer Maxim Integrated
File Size 538.01 KB
Description 2:1 Video Multiplexer-Amplifiers
Datasheet download datasheet MAX4029 Datasheet
Additional preview pages of the MAX4029 datasheet.

📁 Similar Datasheet

  • MAX402 - Micropower Op Amps (Maxim)
  • MAX4020 - Low-Cost / High-Speed / SOT23 / Single-Supply Op Amps (Maxim)
  • MAX40200 - 1A Ideal Diode (Analog Devices)
  • MAX4022 - Low-Cost / High-Speed / Single-Supply / Gain of +2 Buffers (Maxim)
  • MAX400 - Ultra Low Offset Voltage Operational Amplifier (Maxim)
  • MAX4000 - 2.5GHz 45dB RF-Detecting Controllers (Maxim)
  • MAX40002 - nanoPower 4-Bump Comparator (Analog Devices)
  • MAX40003 - nanoPower 4-Bump Comparator (Analog Devices)
  • MAX40004 - nanoPower 4-Bump Comparator (Analog Devices)
  • MAX40005 - nanoPower 4-Bump Comparator (Analog Devices)
Other Datasheets by Maxim Integrated
  • MAX40200 - 1A Ideal Diode
  • MAX40201 - 0V to 76V Current-Sense Amplifier
  • MAX40203 - 1A Ideal Diodes
  • MAX4023 - 2:1 Video Multiplexer-Amplifiers
  • MAX4024 - 2:1 Video Multiplexer-Amplifiers
  • MAX4025 - 2:1 Video Multiplexer-Amplifiers
  • MAX4026 - 2:1 Video Multiplexer-Amplifiers
  • MAX4028 - 2:1 Video Multiplexer-Amplifiers

Full PDF Text Transcription

Click to expand full text
MAX4028/MAX4029 EVALUATION KIT AVAILABLE Triple/Quad, 2:1 Video Multiplexer-Amplifiers with Input Clamps General Description The MAX4028/MAX4029 are 5V, triple/quad, 2:1 voltagefeedback multiplexer-amplifiers with input clamps and a fixed gain of +2V/V (6dB). Channel 1 (IN1A and IN1B) inputs are clamped to the video sync tip of the input signal, while the remaining inputs can be clamped to either the video sync tip or the video sync of channel 1 (IN1_). The latter is referred to as a key clamp and is pin selectable. Selectable clamp/key-clamp inputs and fixedgain video output buffers make the MAX4028/MAX4029 ideal for video-source switching applications such as entertainment systems, video projectors, and displays/ TVs.
Published: |