Datasheet4U Logo Datasheet4U.com

MAX5048C - MOSFET Driver

Description

The MAX5048C is a high-speed MOSFET driver capable of sinking/sourcing 7A/3A peak currents.

This device takes logic input signals and drives a large external MOSFET.

The device has inverting and noninverting inputs that give the user greater flexibility in controlling the MOSFET.

Features

  • necessary to drive low-side enhancement-mode Gallium Nitride (GaN) FETs. The device features two separate outputs working in complementary mode, offering flexibility in controlling both turn-on and turn-off switching speeds. The device has internal logic circuitry, which prevents shoot-through during output state changes. The logic inputs are protected against voltage spikes up to +14V, regardless of V+ voltage. Propagation delay time is minimized and matched between the inverting and noninverti.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5048 7.6A / 12ns / SOT23 MOSFET Driver Maxim
MAX504 5V / Low-Power / Voltage-Output / Serial 10-Bit DACs Maxim
MAX500 CMOS / Quad / Serial-Interface 8-Bit DAC Maxim
MAX5003 High-Voltage PWM Power-Supply Controller Maxim
MAX501 Voltage-Output / 12-Bit Multiplying DACs Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX5041 Dual-Phase / Parallelable / Average Current-Mode Controllers
MAX5041A Dual-Phase / Parallelable / Average-Current-Mode Controllers
MAX5042 Two-Switch Power-IC
MAX5043 Two-Switch Power-IC
MAX5014 Current-Mode PWM Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX5048C EVALUATION KIT AVAILABLE 7A Sink/3A Source Current, 8ns, SOT23, MOSFET Driver General Description The MAX5048C is a high-speed MOSFET driver capable of sinking/sourcing 7A/3A peak currents. This device takes logic input signals and drives a large external MOSFET. The device has inverting and noninverting inputs that give the user greater flexibility in controlling the MOSFET. The device also has the features necessary to drive low-side enhancement-mode Gallium Nitride (GaN) FETs. The device features two separate outputs working in complementary mode, offering flexibility in controlling both turn-on and turn-off switching speeds. The device has internal logic circuitry, which prevents shoot-through during output state changes.
Published: |