Datasheet4U Logo Datasheet4U.com

MAX5142 - 14-Bit DACs

Download the MAX5142 datasheet PDF. This datasheet also covers the MAX5141 variant, as both devices belong to the same 14-bit dacs family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX5141

MAX5144 are serial-input, voltage-output, 14-bit digital-to-analog converters (DACs) in tiny µMAX packages, 50% smaller than comparable DACs in an 8-pin SO.

They operate from low +3V (MAX5143/ MAX5144) or +5V (MAX5141/MAX5142) single supplies.

Key Features

  • o Miniature (3mm x 5mm) 8-Pin µMAX Package o Low 120µA Supply Current o Fast 1µs Settling Time o 25MHz SPI/QSPI/.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX5141_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5143 14-Bit DACs
MAX5144 14-Bit DACs
MAX5113 14-Bit Current DAC
MAX5121 Serial Voltage-Output DACs
MAX5123 Force/Sense DACs
MAX5172 14-Bit DACs
MAX5173 14-Bit DACs
MAX5176 12-Bit DACs
MAX5177 12-Bit DACs
MAX5183 Current/Voltage Simultaneous-Output DACs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX5141–MAX5144 19-1849; Rev 1; 5/01 +3V/+5V, Serial-Input, Voltage-Output, 14-Bit DACs General Description The MAX5141–MAX5144 are serial-input, voltage-output, 14-bit digital-to-analog converters (DACs) in tiny µMAX packages, 50% smaller than comparable DACs in an 8-pin SO. They operate from low +3V (MAX5143/ MAX5144) or +5V (MAX5141/MAX5142) single supplies. They provide 14-bit performance (±1LSB INL and DNL) over temperature without any adjustments. The DAC output is unbuffered, resulting in a low supply current of 120µA and a low offset error of 2LSBs. The DAC output range is 0V to VREF. For bipolar operation, matched scaling resistors are provided in the MAX5142/MAX5144 for use with an external precision op amp (such as the MAX400), generating a ±VREF output swing.