Datasheet4U Logo Datasheet4U.com

MAX5191 - Alternate-Phase Output DACs

This page provides the datasheet information for the MAX5191, a member of the MAX5188 Alternate-Phase Output DACs family.

Description

The MAX5188 is a dual 8-bit, alternate-phase-update, current-output digital-to-analog converter (DAC) designed for superior performance in systems requiring analog signal reconstruction with low distortion and low-power operation.

📥 Download Datasheet

Datasheet preview – MAX5191

Datasheet Details

Part number MAX5191
Manufacturer Maxim Integrated
File Size 226.86 KB
Description Alternate-Phase Output DACs
Datasheet download datasheet MAX5191 Datasheet
Additional preview pages of the MAX5191 datasheet.

📁 Similar Datasheet

  • MAX519 - 2-Wire Serial 8-Bit DACs (Maxim)
  • MAX5190 - 8-Bit / 40MHz / Current / Voltage-Output DACs (Maxim)
  • MAX5195 - 260Msps High-Dynamic Performance DAC (Maxim Integrated Products)
  • MAX510 - Quad / Serial 8-Bit DACs (Maxim)
  • MAX5100 - +2.7V to +5.5V / Low-Power / Quad / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs (Maxim)
  • MAX5101 - +2.7V to +5.5V / Low-Power / Triple / Parallel 8-Bit DAC (Maxim)
  • MAX5102 - +2.7V to +5.5V / Low-Power / Dual / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs (Maxim)
  • MAX5104 - Low-Power / Dual / Voltage-Output / 12-Bit DAC with Serial Interface (Maxim)
  • MAX5105 - Nonvolatile / Quad / 8-Bit DACs (Maxim)
  • MAX5106 - Nonvolatile / Quad / 8-Bit DACs (Maxim)
Other Datasheets by Maxim Integrated

Full PDF Text Transcription

Click to expand full text
19-1580; Rev 0; 12/99 MAX5188/MAX5191 Dual, 8-Bit, 40MHz, Current/Voltage, Alternate-Phase Output DACs General Description The MAX5188 is a dual 8-bit, alternate-phase-update, current-output digital-to-analog converter (DAC) designed for superior performance in systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5191 provides equal specifications, with on-chip output resistors for voltageoutput operation. Both devices are designed for 10pVs glitch operation to reduce distortion and minimize unwanted spurious signal components at the output. An on-board +1.2V bandgap circuit provides a well-regulated, low-noise reference that may be disabled for external reference operation.
Published: |