Datasheet4U Logo Datasheet4U.com

MAX5414 - Digital Potentiometers

This page provides the datasheet information for the MAX5414, a member of the MAX5413 Digital Potentiometers family.

Description

The MAX5413/MAX5414/MAX5415 is a family of dual linear taper digital potentiometers.

Each device has two 3-terminal potentiometers.

The MAX5413/MAX5414/ MAX5415 operate from +2.7V to +5.5V single-supply voltages and use an ultra-low 0.1µA supply current.

📥 Download Datasheet

Datasheet preview – MAX5414

Datasheet Details

Part number MAX5414
Manufacturer Maxim Integrated
File Size 532.24 KB
Description Digital Potentiometers
Datasheet download datasheet MAX5414 Datasheet
Additional preview pages of the MAX5414 datasheet.

📁 Similar Datasheet

  • MAX541 - +5V / Serial-Input / Voltage-Output / 16-Bit DACs (Maxim)
  • MAX5411 - Log Taper Digital Potentiometers (Maxim)
  • MAX5413 - Digital Potentiometers (Maxim)
  • MAX5415 - Dual / 256-Tap / Low-Drift / Digital Potentiometers (Maxim)
  • MAX5417 - 256-Tap Nonvolatile I2C-Interface Digital Potentiometers (Maxim Integrated Products)
  • MAX5418 - 256-Tap Nonvolatile I2C-Interface Digital Potentiometers (Maxim Integrated Products)
  • MAX5419 - 256-Tap Nonvolatile I2C-Interface Digital Potentiometers (Maxim Integrated Products)
  • MAX5400 - 256-Tap SOT-PoT / Low-Drift Digital Potentiometers in SOT23 (Maxim)
  • MAX5401 - 256-Tap SOT-PoT / Low-Drift Digital Potentiometers in SOT23 (Maxim)
  • MAX5402 - 256-Tap / PoT / Low-Drift / Digital Potentiometer (Maxim)
Other Datasheets by Maxim Integrated
  • MAX5410 - Log Taper Digital Potentiometers
  • MAX5409 - Log Taper Digital Potentiometers
  • MAX5450 - Digital Potentiometers
  • MAX5451 - Digital Potentiometers
  • MAX5452 - Digital Potentiometers
  • MAX5453 - Digital Potentiometers
  • MAX5454 - Digital Potentiometers
  • MAX5455 - Digital Potentiometers

Full PDF Text Transcription

Click to expand full text
19-1943; Rev 0; 1/01 MAX5413/MAX5414/MAX5415 Dual, 256-Tap, Low-Drift, Digital Potentiometers in 14-Pin TSSOP General Description The MAX5413/MAX5414/MAX5415 is a family of dual linear taper digital potentiometers. Each device has two 3-terminal potentiometers. The MAX5413/MAX5414/ MAX5415 operate from +2.7V to +5.5V single-supply voltages and use an ultra-low 0.1µA supply current. These devices also provide glitchless switching between resistor taps, as well as a convenient poweron reset (POR) that sets the wiper to the midscale position at power-up. Each potentiometer consists of a fixed resistor with a wiper contact that is digitally controlled through a 3-wire serial interface and has 256 tap points. It performs the same function as a discrete potentiometer or variable resistor.
Published: |