Datasheet4U Logo Datasheet4U.com

MAX5661 - Single 16-Bit DAC

Description

The MAX5661 single 16-bit DAC with precision highvoltage amplifiers provides a complete solution for programmable current and voltage-output applications.

The output amplifiers swing to industry-standard levels of ±10V (voltage output) or source from 0mA (or from 4mA) to 20mA (current output).

Features

  • 10-Bit Programmable Full-Scale Output Adjustment for Up to ±25% Over Range.
  • Programmable Voltage Output Unipolar Range: 0 to +10.24V ±25% Bipolar Range: ±10.24V ±25%.
  • Programmable Current Output Unipolar Low Range: 0 to 20.45mA Unipolar High Range: 3.97mA to 20.45mA.
  • Flexible Analog Supplies (See Table 16) ±13.48V to ±15.75V for Voltage Output +13.48V to +40V for Current Output.
  • Force-Sense Connections (Voltage Output) for Differential Voltage-Output.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX560 +3.3V Transceiver with Wow EIA/TIA-562 Receivers Active in Shutdown Maxim
MAX561 +3.3V Transceiver Maxim
MAX562 Complete 230kbps / 2.7V to 5.25V Serial Interface for Notebook Computers Maxim
MAX563 +3.3V-Powered / EIA/TIA-562 Dual Transceiver with Receivers Active in Shutdown Maxim
MAX5679 Digitally Programmable LCD Gamma Reference Generator Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX5014 Current-Mode PWM Controllers
MAX5015 Current-Mode PWM Controllers
MAX5033 MAXPower Step-Down DC-DC Converter
MAX5041 Dual-Phase / Parallelable / Average Current-Mode Controllers
MAX5041A Dual-Phase / Parallelable / Average-Current-Mode Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0741; Rev 1; 5/09 MAX5661 Single 16-Bit DAC with Current and Voltage Outputs for Industrial Analog Output Modules General Description The MAX5661 single 16-bit DAC with precision highvoltage amplifiers provides a complete solution for programmable current and voltage-output applications. The output amplifiers swing to industry-standard levels of ±10V (voltage output) or source from 0mA (or from 4mA) to 20mA (current output). The voltage output (OUTV) drives resistive loads greater than 2kΩ and capacitive loads of up to 1.2µF. Voltage-output forcesense connections compensate for series protection resistors and field-wiring resistance. Short-circuit protection on the voltage output limits output current to 10mA (typ) sourcing or -11.5mA (typ) sinking.
Published: |