Datasheet4U Logo Datasheet4U.com

MAX5852 - Current-Output DAC

Description

The MAX5852 dual, 8-bit, 165Msps digital-to-analog converter (DAC) provides superior dynamic performance in wideband communication systems.

The device integrates two 8-bit DAC cores, and a 1.24V reference.

The MAX5852 supports single-ended and differential modes of operation.

Features

  • digital control of channel gain matching to within ±0.4dB in sixteen 0.05dB steps. Channel matching improves sideband suppression in analog quadrature modulation.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5856A Dual 8-Bit / 300Msps DAC Maxim
MAX5858 Dual / 10-Bit / 300Msps / Current-Output DAC Maxim
MAX5858A Dual / 10-Bit / 300Msps DAC Maxim
MAX5800 8-/10-/12-Bit DACs Maxim
MAX5801 8-/10-/12-Bit DACs Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX5854 Current-Output DAC
MAX5823 (MAX5823 - MAX5825) 8-/10-/12-Bit Buffered Output DACs
MAX5824 (MAX5823 - MAX5825) 8-/10-/12-Bit Buffered Output DACs
MAX5825 (MAX5823 - MAX5825) 8-/10-/12-Bit Buffered Output DACs
MAX5882 4.6Gsps Cable Downstream Direct RF Synthesis DAC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3232; Rev 0; 4/04 EVAALVUAAILTAIOBNLEKIT Dual, 8-Bit, 165Msps, Current-Output DAC MAX5852 General Description The MAX5852 dual, 8-bit, 165Msps digital-to-analog converter (DAC) provides superior dynamic performance in wideband communication systems. The device integrates two 8-bit DAC cores, and a 1.24V reference. The MAX5852 supports single-ended and differential modes of operation. The dynamic performance is maintained over the entire 2.7V to 3.6V power-supply operating range. The analog outputs support a -1.0V to +1.25V compliance voltage. The MAX5852 can operate in interleaved data mode to reduce the I/O pin count. This allows the converter to be updated on a single, 8-bit bus. The MAX5852 features digital control of channel gain matching to within ±0.4dB in sixteen 0.05dB steps.
Published: |