Datasheet4U Logo Datasheet4U.com

MAX5917 - +65V Simple Swapper Hot-Swap Switches

This page provides the datasheet information for the MAX5917, a member of the MAX5910 +65V Simple Swapper Hot-Swap Switches family.

Description

The MAX5910/MAX5917 are fully integrated hot-swap switches for positive supply rails.

These devices allow the safe insertion and removal of circuit cards into live backplanes or ports without causing glitches on the backplane power-supply rail.

📥 Download Datasheet

Datasheet preview – MAX5917

Datasheet Details

Part number MAX5917
Manufacturer Maxim Integrated
File Size 273.46 KB
Description +65V Simple Swapper Hot-Swap Switches
Datasheet download datasheet MAX5917 Datasheet
Additional preview pages of the MAX5917 datasheet.

📁 Similar Datasheet

  • MAX5910 - +65V Simple Swapper Hot-Swap Switches (Maxim)
  • MAX5911 - -48V Simple Swapper Hot-Swap Switches (Maxim)
  • MAX5913 - +48V Quad Hot-Swap Controllers (Maxim)
  • MAX5913A - +48V Quad Hot-Swap Controllers (Maxim Integrated Products)
  • MAX5914A - +48V Quad Hot-Swap Controllers (Maxim Integrated Products)
  • MAX5915 - Dual PCI 2.2 Hot-Swap Controllers (Maxim)
  • MAX5918 - Low-Voltage / Dual Hot-Swap Controllers (Maxim)
  • MAX5919 - Low-Voltage / Dual Hot-Swap Controllers (Maxim)
  • MAX5900 - -100V SOT23 Simple Swapper Hot-Swap Controllers (Maxim)
  • MAX5902 - +72V SOT23 Simple Swapper Hot-Swap Controllers (Maxim)
Other Datasheets by Maxim Integrated
  • MAX5912 - -48V Simple Swapper Hot-Swap Switches
  • MAX5914 - +48V Quad Hot-Swap Controllers
  • MAX5915A - Dual PCI 2.2 Hot-Swap Controllers
  • MAX5916 - Dual PCI 2.2 Hot-Swap Controllers
  • MAX5916A - Dual PCI 2.2 Hot-Swap Controllers
  • MAX5901 - -100V SOT23 Simple Swapper Hot-Swap Controllers
  • MAX5905 - Low-Voltage / Dual Hot-Swap Controllers/Power Sequencers
  • MAX5906 - Low-Voltage / Dual Hot-Swap Controllers/Power Sequencers

Full PDF Text Transcription

Click to expand full text
19-1706; Rev 0; 7/01 +65V Simple Swapper Hot-Swap Switches MAX5910/MAX5917 General Description The MAX5910/MAX5917 are fully integrated hot-swap switches for positive supply rails. These devices allow the safe insertion and removal of circuit cards into live backplanes or ports without causing glitches on the backplane power-supply rail. They also monitor various circuit parameters and disconnect the load if a fault condition occurs, alerting the host with a logic-level IFAULT output. The MAX5910/MAX5917 operate over a +10V to +65V input voltage range. They are designed to permit hot plugging of an internet appliance such as an IP phone but are not limited to that application.
Published: |