Datasheet4U Logo Datasheet4U.com

MAX5981B - Powered Device Interface Controllers

Download the MAX5981B datasheet PDF. This datasheet also covers the MAX5981A variant, as both devices belong to the same powered device interface controllers family and are provided as variant models within a single manufacturer datasheet.

Description

The MAX5981 provides a com­plete interface for a powered device (PD) to comply with the IEEE® 802.3af/at standard in a power-over-ethernet (PoE) system.

Features

  • an input UVLO with wide hysteresis and long deglitch time to compensate for twisted-pair cable resistive drop and to assure glitch-free transition during power-on/-off condi­tions. The MAX5981 can with­stand up to 100V at the input. The MAX5981 supports a 2-Event classification method as specified in the IEEE 802.3at standard and provides a signal to indicate when probed by a Type 2 power sourcing equipment (PSE). The device detects the presence of a wall adapter power source connection and allo.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX5981A-MaximIntegrated.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5984 IEEE 802.3af/at PSE Controller Maxim Integrated Products
MAX5900 -100V SOT23 Simple Swapper Hot-Swap Controllers Maxim
MAX5902 +72V SOT23 Simple Swapper Hot-Swap Controllers Maxim
MAX5903 +72V SOT23 Simple Swapper Hot-Swap Controllers Maxim
MAX5904 Low-Voltage / Dual Hot-Swap Controllers/Power Sequencers Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX5981A Powered Device Interface Controllers
MAX5980 IEEE 802.3at/af PSE Controller
MAX5982A Powered Device Interface Controllers
MAX5982B Powered Device Interface Controllers
MAX5982C Powered Device Interface Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX5981A/MAX5981B 19-5732; Rev 2; 8/11 IEEE 802.3af/at-Compliant, Powered Device Interface Controllers with Integrated Power MOSFET General Description The MAX5981 provides a com­plete interface for a powered device (PD) to comply with the IEEE® 802.3af/at standard in a power-over-ethernet (PoE) system. The MAX5981 provides the PD with a detection signature, classifica­tion signature, and an integrated isolation power switch with inrush current control. During the inrush period, the MAX5981 limits the current to less than 180mA before switching to the higher curr­ent limit (720mA to 880mA) when the isolation power MOSFET is fully enhanced.
Published: |