Datasheet4U Logo Datasheet4U.com

MAX6414 - Single/Dual-Voltage uP Reset Circuits

This page provides the datasheet information for the MAX6414, a member of the MAX6420 Single/Dual-Voltage uP Reset Circuits family.

Description

The MAX6412

MAX6420 low-power microprocessor supervisor circuits monitor system voltages from 1.6V to 5V.

These devices are designed to assert a reset signal whenever the VCC supply voltage or RESET IN falls below its reset threshold or the manual reset input is asserted.

📥 Download Datasheet

Datasheet preview – MAX6414

📁 Similar Datasheet

  • MAX641 - Fixed Output 10W CMOS Step-Up Switching Regulators (Maxim)
  • MAX6410 - Voltage Detectors (Maxim Integrated Products)
  • MAX6411 - Voltage Detectors (Maxim Integrated Products)
  • MAX640 - Step-Down DC-DC Converters (Maxim)
  • MAX6400 - uP Supervisory Circuits (Maxim)
  • MAX6401 - uP Supervisory Circuits (Maxim)
  • MAX6402 - uP Supervisory Circuits (Maxim)
  • MAX6403 - uP Supervisory Circuits (Maxim)
  • MAX6404 - uP Supervisory Circuits (Maxim)
  • MAX6405 - uP Supervisory Circuits (Maxim)
Other Datasheets by Maxim Integrated
  • MAX6412 - Single/Dual-Voltage uP Reset Circuits
  • MAX6413 - Single/Dual-Voltage uP Reset Circuits
  • MAX6415 - Single/Dual-Voltage uP Reset Circuits
  • MAX6416 - Single/Dual-Voltage uP Reset Circuits
  • MAX6417 - Single/Dual-Voltage uP Reset Circuits
  • MAX6418 - Single/Dual-Voltage uP Reset Circuits
  • MAX6419 - Single/Dual-Voltage uP Reset Circuits
  • MAX6421 - Low-Power / SC70/SOT uP Reset Circuits

Full PDF Text Transcription

Click to expand full text
MAX6412–MAX6420 Low-Power, Single/Dual-Voltage μP Reset Circuits with Capacitor-Adjustable Reset Timeout Delay General Description The MAX6412–MAX6420 low-power microprocessor supervisor circuits monitor system voltages from 1.6V to 5V. These devices are designed to assert a reset signal whenever the VCC supply voltage or RESET IN falls below its reset threshold or the manual reset input is asserted. The reset output remains asserted for the reset timeout period after VCC and RESET IN rise above the reset threshold and the manual reset input is deasserted. The reset timeout is externally set by a capacitor to provide more flexibility. The MAX6412/MAX6413/MAX6414 feature fixed thresholds from 1.575V to 5V in approximately 100mV increments and a manual reset input.
Published: |