900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Maxim Integrated Semiconductor Electronic Components Datasheet

MAX6888 Datasheet

Power-Supply Supervisory

No Preview Available !

19-0291; Rev 2; 2/10
Hex/Quad, Power-Supply Supervisory Circuits
General Description
The MAX6887/MAX6888 multivoltage supply supervi-
sors provide several voltage-detector inputs, one watch-
dog input, and three outputs. Each voltage-detector
input offers a factory-set undervoltage and overvoltage
threshold. Manual reset and margin disable inputs offer
additional flexibility.
The MAX6887 offers six voltage-detector inputs, while
the MAX6888 offers four inputs. Output RESET asserts
when any input voltage drops below its respective
undervoltage threshold or manual reset MR is asserted.
Output OV asserts when any input voltage exceeds its
respective overvoltage threshold. Monitor standard
supply voltages listed in the Selector Guide.
The MAX6887/MAX6888 offer a watchdog timer with an
initial and normal timeout periods of 102.4s and 1.6s,
respectively. Watchdog output WDO asserts when the
watchdog timer expires. Connect WDO to manual reset
input MR to generate resets when the watchdog timer
expires. RESET, OV, and WDO are active-low, open-
drain outputs.
The MAX6887/MAX6888 are available in a 5mm x 5mm
x 0.8mm, 16-pin thin QFN package and operate over
the extended -40°C to +85°C temperature range.
Applications
Multivoltage Systems
Telecom
Networking
Servers/Workstations/Storage Systems
Features
o Hex/Quad Voltage Detectors
o Undervoltage and Overvoltage Thresholds
o 1% Threshold Accuracy
o Margining Disable and Manual Reset Input
o Watchdog Timer
o Open-Drain RESET, OV, and WDO Outputs
o 180ms (min) Reset Timeout Period
o Few External Components
o Small 5mm x 5mm, 16-Pin Thin QFN Packages
Ordering Information
PART
TEMP RANGE PIN-PACKAGE
MAX6887_ETE+
-40°C to +85°C 16 Thin QFN-EP*
MAX6888_ETE+
-40°C to +85°C 16 Thin QFN-EP*
Note: Insert the desired letter from the Selector Guide into the
blank to complete the part number.
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
Pin Configurations and Typical Operating Circuit appear at
end of data sheet.
Selector Guide
PART
NOMINAL INPUT VOLTAGE (V)*
IN1 IN2 IN3 IN4 IN5 IN6
MAX6887AETE 5.0 3.3 2.5 1.8 Adj Adj
MAX6887BETE 5.0 3.3 2.5 Adj Adj Adj
MAX6887CETE 5.0 3.3 1.8 Adj Adj Adj
MAX6887DETE 3.3 2.5 1.8 1.5 Adj Adj
MAX6887EETE 3.3 2.5 1.8 Adj Adj Adj
MAX6887FETE 3.3 2.5 1.5 Adj Adj Adj
MAX6887GETE 3.3 2.5 Adj Adj Adj Adj
MAX6887HETE 3.3 1.8 Adj Adj Adj Adj
MAX6887QETE Adj Adj Adj Adj Adj Adj
TOL
(%)
5
5
5
5
5
5
5
5
5
PART
NOMINAL INPUT VOLTAGE (V)*
IN1 IN2 IN3 IN4 IN5 IN6
MAX6887IETE 5.0 3.3 2.5 1.8 Adj Adj
MAX6887JETE 5.0 3.3 2.5 Adj Adj Adj
MAX6887KETE 5.0 3.3 1.8 Adj Adj Adj
MAX6887LETE 3.3 2.5 1.8 1.5 Adj Adj
MAX6887METE 3.3 2.5 1.8 Adj Adj Adj
MAX6887NETE 3.3 2.5 1.5 Adj Adj Adj
MAX6887OETE 3.3 2.5 Adj Adj Adj Adj
MAX6887PETE 3.3 1.8 Adj Adj Adj Adj
MAX6887RETE Adj Adj Adj Adj Adj Adj
*See thresholds options tables (Tables 1 and 2) for actual undervoltage and overvoltage thresholds.
Selector Guides continued at end of data sheet.
TOL
(%)
10
10
10
10
10
10
10
10
10
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.


Maxim Integrated Semiconductor Electronic Components Datasheet

MAX6888 Datasheet

Power-Supply Supervisory

No Preview Available !

Hex/Quad, Power-Supply Supervisory Circuits
ABSOLUTE MAXIMUM RATINGS
(All voltages referenced to GND.)
IN1–IN6, VCC, RESET, OV, WDO .............................-0.3V to +6V
WDI, MR, MARGIN ...................................................-0.3V to +6V
BP .............................................................................-0.3V to +3V
Input/Output Current (all pins)..........................................±20mA
Continuous Power Dissipation (TA = +70°C)
16-Pin 5mm x 5mm Thin QFN
(derate 20.8mW/°C above +70°C) ..............................1667mW
Maximum Junction Temperature .....................................+150°C
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VIN1–VIN4 or VCC = 2.7V to 5.8V, WDI = GND, MARGIN = MR = BP, TA = -40°C to +85°C, unless otherwise noted. Typical values are
at TA = +25°C.) (Notes 1, 2)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Operating Voltage Range
(Note 3)
Supply Current
Threshold Accuracy
(See the Selector Guide)
Threshold Hysteresis
Threshold Tempco
Voltage on either one of IN1–IN4 or VCC to
guarantee the part is fully operational
2.7
5.8 V
ICC VIN1 = 5.8V, IN2–IN6 = GND, no load
0.9 1.2 mA
VTH
IN1–IN6, IN_ falling, TA = +25°C to +85°C
IN1–IN6, IN_ falling, TA = -40°C to +85°C
-1
-1.5
+1
+1.5
% VTH
VTH-HYST
0.3 % VTH
VTH/°C
10 ppm/°C
IN_ Input Impedance
For VIN_ < highest VIN1IN4 and
RIN VIN_ < VCC (not ADJ), thresholds are not set 130 200 300
as adjustable
k
IN_ Input Leakage Current
Power-Up Delay
IN_ to RESET or OV Delay
RESET Timeout Period
OV Timeout Period
RESET, OV, and WDO Output
Low
RESET, OV, and WDO Output
Open-Drain Leakage Current
IIN
tD-PO
tD-R
tRP
tOP
VOL
IN5, IN6 (MAX6887 only)
IN1–IN4 set as adjustable thresholds
VCC 2.5V
IN_ falling/rising, 100mV overdrive
ISINK = 4mA, output asserted
ILKG Output high impedance
-150
180
+150
2.5
20
200 220
25
0.4
nA
ms
µs
ms
µs
V
-1 +1 µA
2 _______________________________________________________________________________________


Part Number MAX6888
Description Power-Supply Supervisory
Maker Maxim Integrated
PDF Download

MAX6888 Datasheet PDF






Similar Datasheet

1 MAX688 High-Accuracy / Low-Dropout Linear Regulators
Maxim Integrated
2 MAX6880 Power-Supply Sequencers/Supervisors
Maxim Integrated Products
3 MAX6881 Power-Supply Sequencers/Supervisors
Maxim Integrated Products
4 MAX6882 Power-Supply Sequencers/Supervisors
Maxim Integrated Products
5 MAX6883 Power-Supply Sequencers/Supervisors
Maxim Integrated Products
6 MAX6886 Hex Power-Supply Supervisory
Maxim Integrated
7 MAX6887 Power-Supply Supervisory
Maxim Integrated
8 MAX6888 Power-Supply Supervisory
Maxim Integrated





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy