Datasheet4U Logo Datasheet4U.com

MAX6970 - 36V Constant-Current LED Driver

General Description

The MAX6970 serial-interfaced LED driver provides eight open-drain, constant-current-sinking LED driver outputs rated at 36V.

The device operates from a 3V to 5.5V supply.

The MAX6970 supply and the LEDs’ supply can power up in any order.

Key Features

  • 25Mbps Industry-Standard 4-Wire Serial Interface at 5V.
  • 3V to 5.5V Logic Supply.
  • Eight Constant-Current LED Outputs Rated at 36V.
  • Up to 55mA Continuous Current per Output.
  • Output Current Programmed by Single Resistor.
  • 3% Current Matching Between Outputs.
  • 6% Current Matching Between ICs.
  • -40°C to +125°C Temperature Range Ordering Information PART TEMP RANGE MAX6970AUE -40°C to +125°C MAX6970AAE -40°C to +125°C.
  • EP =.

📥 Download Datasheet

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX6977 5.5V Constant-Current LED Driver
MAX6979 5.5V Constant-Current LED Driver
MAX690R 3.0V/3.3V Microprocessor Supervisory Circuits
MAX690S 3.0V/3.3V Microprocessor Supervisory Circuits
MAX690T 3.0V/3.3V Microprocessor Supervisory Circuits
MAX6917 I2C-Compatible RTC
MAX6964ATG 17-Output LED Driver/GPO
MAX6966 10-Port Constant-Current LED Drivers and I/O Expanders
MAX6967 10-Port Constant-Current LED Drivers and I/O Expanders
MAX6021 Precision / Low-Power / Low-Dropout / SOT23-3 Voltage References

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3890; Rev 0; 10/05 EVAALVUAAILTAIOBNLEKIT 8-Port, 36V Constant-Current LED Driver MAX6970 General Description The MAX6970 serial-interfaced LED driver provides eight open-drain, constant-current-sinking LED driver outputs rated at 36V. The device operates from a 3V to 5.5V supply. The MAX6970 supply and the LEDs’ supply can power up in any order. The constant-current outputs are programmed together up to 55mA using a single external resistor. The MAX6970 operates with a 25Mbps, industry-standard, 4-wire serial interface. The MAX6970 uses the industry-standard shift-registerplus-latch-type serial interface. The driver accepts data shifted into an 8-bit shift register using data input DIN and clock input CLK.