Datasheet4U Logo Datasheet4U.com

MAX713 - NiCd/NiMH Battery Fast-Charge Controllers

This page provides the datasheet information for the MAX713, a member of the MAX712 NiCd/NiMH Battery Fast-Charge Controllers family.

Description

The MAX712/MAX713 fast-charge Nickel Metal Hydride (NiMH) and Nickel Cadmium (NiCd) batteries from a DC source at least 1.5V higher than the maximum battery voltage.

1 to 16 series cells can be charged at rates up to 4C.

📥 Download Datasheet

Datasheet preview – MAX713

Datasheet Details

Part number MAX713
Manufacturer Maxim Integrated
File Size 229.76 KB
Description NiCd/NiMH Battery Fast-Charge Controllers
Datasheet download datasheet MAX713 Datasheet
Additional preview pages of the MAX713 datasheet.

📁 Similar Datasheet

  • MAX71313L - Single-Phase Electricity Meter SoC (Silergy)
  • MAX71314C - SinglePhase/Polyphase Electricity Meter SoC (Silergy)
  • MAX71314L - Single-Phase Electricity Meter SoC (Silergy)
  • MAX71315C - SinglePhase/Polyphase Electricity Meter SoC (Silergy)
  • MAX71315S - Poly- and Single-Phase Energy Meter SoCs (Silergy)
  • MAX71316S - Poly- and Single-Phase Energy Meter SoCs (Silergy)
  • MAX71334C - SinglePhase/Polyphase Electricity Meter SoC (Silergy)
  • MAX71335C - SinglePhase/Polyphase Electricity Meter SoC (Silergy)
  • MAX71335S - Poly- and Single-Phase Energy Meter SoCs (Silergy)
  • MAX71336S - Poly- and Single-Phase Energy Meter SoCs (Silergy)
Other Datasheets by Maxim Integrated
  • MAX71314 - Single-Phase Electricity Meter SOC
  • MAX71315 - Single-Phase Electricity Meter SOC
  • MAX71020A - Energy Measurement AFE
  • MAX71071 - Dual-Channel Isolated Metrology ADCs
  • MAX71071H - Dual-Channel Isolated Metrology ADCs
  • MAX7126 - Digit A/D Converter
  • MAX7037 - RF ISM Transceiver
  • MAX704R - 3.0V/3.3V Microprocessor Supervisory Circuits

Full PDF Text Transcription

Click to expand full text
EVALUATION KIT AVAILABLE MAX712/MAX713 NiCd/NiMH Battery Fast-Charge Controllers General Description The MAX712/MAX713 fast-charge Nickel Metal Hydride (NiMH) and Nickel Cadmium (NiCd) batteries from a DC source at least 1.5V higher than the maximum battery voltage. 1 to 16 series cells can be charged at rates up to 4C. A voltage-slope detecting analog-to-digital converter, timer, and temperature window comparator determine charge completion. The MAX712/MAX713 are powered by the DC source via an on-board +5V shunt regulator. They draw a maximum of 5µA from the battery when not charging. A low-side current-sense resistor allows the battery charge current to be regulated while still supplying power to the battery’s load.
Published: |