Datasheet4U Logo Datasheet4U.com

MAX77179 - High-Bandwidth LTE/WCDMA PA Power Management

Download the MAX77179 datasheet PDF. This datasheet also covers the MAX77178 variant, as both devices belong to the same high-bandwidth lte/wcdma pa power management family and are provided as variant models within a single manufacturer datasheet.

Description

The MAX77178/MAX77179 step-down converters are optimized for powering the power amplifier (PA) in multimode/multiband handsets for 3G/4G applications such as LTE, WCDMA, as well as other RF PA applications such as Wi-FiM and WiMAXM.

Features

  • include overcurrent and overtemperature protection, and a very low-current (0.1µA, typ) shutdown mode. WiMAX is a registered certification mark and service mark of WiMAX Forum. Wi-Fi is a registered certification mark of Wi-Fi Alliance Corporation. Features S Meet 3G/4G Timing and RF Spectrum Mask Requirements.
  • 20µs (typ) Settling Time for 0.5V to 3.4V Output Voltage Change.
  • 30µs (typ) Settling from Enable to 95% Output Voltage Regulation S Four Selectable Output Voltages with Logic.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX77178-MaximIntegrated.pdf) that lists specifications for multiple related part numbers.

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EVALUATION KIT AVAILABLE MAX77178 / MAX77179 High-Bandwidth LTE/WCDMA PA Power Management ICs in a 1.75mm x 1.4mm, 0.4mm Pitch WLP General Description The MAX77178/MAX77179 step-down converters are optimized for powering the power amplifier (PA) in multimode/multiband handsets for 3G/4G applications such as LTE, WCDMA, as well as other RF PA applications such as Wi-FiM and WiMAXM. The 2.5V to 5.5V input supply range supports both current and future battery chemistries. The MAX77179 uses an analog input driven by an external DAC to control the output voltage linearly for continuous PA power adjustment. The output voltage range (0.5V to VIN) supports operation with a wide variety of PAs.
Published: |