Datasheet4U Logo Datasheet4U.com

MAX77734 - Ultra-Low Power Tiny PMIC

Description

The MAX77734 is a tiny PMIC for applications where size and simplicity are critical.

The IC integrates a linear-mode Li+ battery charger, low-dropout linear regulator (LDO), analog multiplexer, and dual-channel current sink driver.

Features

  • Extends Battery Life.
  • 200nA Factory-Ship Mode for Long Shelf Life.
  • 500nA Shutdown Current.
  • 4.5μA Quiescent Current with LDO Enabled.
  • Charger Allows Battery to Relax after Charging.
  • Linear Charger Optimized for Small Battery Size​.
  • 7.5mA to 300mA Fast-Charge Current.
  • Battery Regulation Voltage from 3.6V to 4.6V.
  • Accurate Termination Current as low as 0.375mA.
  • Instant-On Functionality provided by M.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX777 Setp up DC-DC Converters Maxim
MAX77785 3.5A 1-Cell Li+ Battery Charger Analog Devices
MAX77786 5.5A 1-Cell Li+ Battery Charger Analog Devices
MAX777L Low-Voltage Input / 3V/3.3V/5V/ Adjustable Output / Step-Up DC-DC Converters Maxim
MAX770 5V/12V/15V or Adjustable / High-Efficiency / Low IQ / Step-Up DC-DC Controllers Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX77714 Complete System PMIC / Featuring 13 Regulators / 8 GPIOs / RTC and Flexible Power Sequencing
MAX77752 Multichannel Integrated Power Management IC
MAX77756 500mA Buck Regulator
MAX77178 High-Bandwidth LTE/WCDMA PA Power Management
MAX77179 High-Bandwidth LTE/WCDMA PA Power Management

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EVALUATION KIT AVAILABLE Click here for production status of specific part numbers. MAX77734 Ultra-Low Power Tiny PMIC with Power Path Charger for Small Li+ and 150mA LDO General Description The MAX77734 is a tiny PMIC for applications where size and simplicity are critical. The IC integrates a linear-mode Li+ battery charger, low-dropout linear regulator (LDO), analog multiplexer, and dual-channel current sink driver. The charger is designed for small-battery systems that require accurate termination as low as 0.375mA. The circuit can instantly regulate the system voltage when an input source is connected even if the battery is depleted. The 150mA LDO's output is programmable between 0.8V and 3.975V with I2C.
Published: |