Datasheet4U Logo Datasheet4U.com

MAX86150 - Integrated Photoplethysmogram and Electrocardiogram Bio-Sensor

Description

The MAX86150 is an integrated electrocardiogram, pulse oximeter, heart rate monitor sensor module.

It includes internal LEDs, photodetector, and low-noise electronics with ambient light rejection.

The MAX86150 helps ease design-in to mobile and wearable devices.

Features

  • Electrocardiogram (ECG) Optimized for Dry Electrode Operation.
  • Reflective Heart Rate Monitor and Medical-Grade Pulse Oximeter.
  • Miniature 3.3mm x 5.6mm x 1.3mm 22-pin Optical Module.
  • Optical-Grade Glass for Long-Term Optimal and Robust Performance.
  • Ultra-Low Power Operation for Mobile Devices.
  • Ultra-Low Shutdown Current (0.7μA Typical).
  • High SNR and Robust Ambient Light Cancellation.
  • -40°C to +85°C Operating Temperat.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX8614A (MAX8614A / MAX8614B) Dual-Output (+ and -) DC-DC Converters Maxim Integrated Products
MAX8614B (MAX8614A / MAX8614B) Dual-Output (+ and -) DC-DC Converters Maxim Integrated Products
MAX860 Switched-Capacitor Voltage Converters Maxim
MAX8600 Single-/Dual-Input 1-Cell Li Chargers Maxim Integrated Products
MAX8600A Single-Input 1-Cell Li+ Charger Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX861 Switched-Capacitor Voltage Converters
MAX86140 Best-in-Class Optical Pulse Oximeter and Heart-Rate Sensor
MAX86141 Best-in-Class Optical Pulse Oximeter and Heart-Rate Sensor
MAX8649A 1.8A Step-Down Regulator
MAX8671X PMIC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Click here for production status of specific part numbers. MAX86150 EVALUATION KIT AVAILABLE Integrated Photoplethysmogram and Electrocardiogram Bio-Sensor Module For Mobile Health General Description The MAX86150 is an integrated electrocardiogram, pulse oximeter, heart rate monitor sensor module. It includes internal LEDs, photodetector, and low-noise electronics with ambient light rejection. The MAX86150 helps ease design-in to mobile and wearable devices. The MAX86150 operates on a 1.8V supply voltage with a separate power supply for the internal LEDs. Communication to and from the module is entirely through a standard I2C-compatible interface. The module can be shut down through software with near zero standby current, allowing the power rails to remain powered at all times.
Published: |