78M6631 Datasheet | Maxim Integrated

AVAILABLE DS_6631_056 DESCRIPTION The Teridian™ 78M6631 is a highly integrated 3-phase power measurement and monitoring system-on-chip (SoC), with a 10 MHz 8051-patible MPU core and Single Converter Technology® containing a 22-bit deltasigma converter and 32-bit pute engine (CE). The 78M6631 has been designed specifically for a wide variety of applications requiring 3-phase power and quality measurements. It supports both Delta and Wye configurations. At the measurement interface, the device provides six analog inputs including three differential current and three voltage for interfacing to current and voltage sensors. The device provides better than 0.5% accuracy over a wide 2000:1 dynamic range. The integrated MPU core and 128 KB of flash memory provide a flexible means of configuration, postprocessing, data formatting, interfacing to host processor via a UART or SPI interface, or using DIO pins for LEDs or relay control. plete firmware is available from Maxim and can be loaded into the IC during manufacturing test. Functional Diagrams 19-6039; Rev 2; 4/12 78M6631 3-Phase PowerMeasurement IC DATA SHEET Features - < 0.5% Watt Accuracy Over 2000:1 Current Range and Over Temperature - Exceeds IEC 62053/ANSI C12.20 Standards - Voltage Reference < 40 ppm/°C - Six Analog Inputs Supporting 3-Phase Voltage and Current Measurement Inputs - Pin- or Biselectable Delta or Wye Configuration - 22-Bit Delta-Sigma ADC with Independent 32- Bit pute Engine (CE) - 8-Bit MPU (80515), One Clock Cycle per Instruction with 4 KB MPU XRAM - 128 KB Flash with Security - 32 kHz Time Base with Hardware Watchdog Timer - UART, I2C, and High-Speed Slave SPI Host Interface Options - 17 General-Purpose 5 V Tolerant I/O Pins - Packaged in a RoHS-pliant (6/6) Lead(Pb)-Free 56-Pin TQFN -...