Datasheet4U Logo Datasheet4U.com

DS2045W - Single-Piece 1M Nonvolatile SRAM

This page provides the datasheet information for the DS2045W, a member of the DS204W Single-Piece 1M Nonvolatile SRAM family.

Description

Pin Configuration appears at end of data sheet.

Features

  • Single-Piece, Reflowable, PBGA Package Footprint.
  • Internal ML Battery and Charger.
  • Unconditionally Write-Protects SRAM when VCC is Out-of-Tolerance.
  • Automatically Switches to Battery Supply when VCC Power Failures Occur.
  • Internal Power-Supply Monitor Detects Power Fail Below Nominal VCC (3.3V).
  • Reset Output can be used as a CPU Supervisor for a Microprocessor.
  • Industrial Temperature Range (-40°C to +85°C).
  • UL Recognized 27m.

📥 Download Datasheet

Datasheet preview – DS2045W

📁 Similar Datasheet

  • DS20424 - Remote Control Color TV Service Manual (Sanyo)
  • DS20425 - Color TV (Sanyo)
  • DS2000-3 - AC-DC / Distributed Power Front-End 1U (Emerson)
  • DS2001 - HIGH CURRENT / VOLTAGE DARLINGTON DRIVERS (National Semiconductor)
  • DS2002 - HIGH CURRENT / VOLTAGE DARLINGTON DRIVERS (National Semiconductor)
  • DS2002SF - Rectifier Diode (Dynex Semiconductor)
  • DS2003 - High Current/Voltage Darlington Drivers (National Semiconductor)
  • DS2004 - (DS2003 / DS2004) High Current/Voltage Darlington Drivers (National Semiconductor)
  • DS2004SF - Rectifier Diode (Dynex Semiconductor)
  • DS2007SF - Rectifier Diode (Dynex Semiconductor)
Other Datasheets by Maxim Integrated Products
  • DS2045AB - Single-Piece 1M Nonvolatile SRAM
  • DS2045L - Single-Piece 1M Nonvolatile SRAM
  • DS2045Y - Single-Piece 1M Nonvolatile SRAM
  • DS2030AB - Single-Piece 256kb Nonvolatile SRAM
  • DS2030W - 3.3V Single-Piece 256k Nonvolatile SRAM
  • DS2030Y - Single-Piece 256kb Nonvolatile SRAM
  • DS2070W - 3.3V Single Piece 16Mb Nonvolatile SRAM
  • DS21448DK - 3.3V E1/T1/J1 Line Interface Design Kit Daughter Card

Full PDF Text Transcription

Click to expand full text
Rev 1; 1/05 w The DS2045W is a 1Mb reflowable nonvolatile (NV) SRAM, which consists of a static RAM (SRAM), an NV controller, and an internal rechargeable manganese lithium (ML) battery. These components are encased in a surface-mount module with a 256-ball BGA footprint. Whenever VCC is applied to the module, it recharges the ML battery, powers the SRAM from the external power source, and allows the contents of the SRAM to be modified. When VCC is powered down or out of tolerance, the controller write-protects the SRAM’s contents and powers the SRAM from the battery. The DS2045W also contains a power-supply monitor output, RST, which can be used as a CPU supervisor for a microprocessor. w w .D at h S a t e e 4U . m o c DS2045W 3.
Published: |