900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Maxim Integrated Semiconductor Electronic Components Datasheet

MAX1072 Datasheet

(MAX1072 / MAX1075) 10-Bit ADCs

No Preview Available !

19-3153; Rev 1; 4/09
1.8Msps, Single-Supply, Low-Power,
True-Differential, 10-Bit ADCs
General Description
The MAX1072/MAX1075 low-power, high-speed, serial-
output, 10-bit, analog-to-digital converters (ADCs) oper-
ate at up to 1.8Msps. These devices feature true-differen-
tial inputs, offering better noise immunity, distortion
improvements, and a wider dynamic range over single-
ended inputs. A standard SPI™/QSPI™/MICROWIRE™
interface provides the clock necessary for conversion.
These devices easily interface with standard digital signal
processor (DSP) synchronous serial interfaces.
The MAX1072/MAX1075 operate from a single +4.75V to
+5.25V supply voltage and require an external reference.
The MAX1072 has a unipolar analog input, while the
MAX1075 has a bipolar analog input. These devices fea-
ture a partial power-down mode and a full power-down
mode for use between conversions, which lower the sup-
ply current to 1mA (typ) and 1µA (max), respectively. Also
featured is a separate power-supply input (VL), which
allows direct interfacing to +1.8V to VDD digital logic. The
fast conversion speed, low-power dissipation, excellent
AC performance, and DC accuracy (±0.5 LSB INL) make
the MAX1072/MAX1075 ideal for industrial process con-
trol, motor control, and base-station applications.
The MAX1072/MAX1075 come in a 12-pin TQFN pack-
age, and are available in the extended (-40°C to +85°C)
temperature range.
Applications
Data Acquisition
Bill Validation
Motor Control
Communications
Portable Instruments
Pin Configuration
Features
1.8Msps Sampling Rate
Only 45mW (typ) Power Dissipation
Only 1µA (max) Shutdown Current
High-Speed, SPI-Compatible, 3-Wire Serial Interface
61dB S/(N + D) at 525kHz Input Frequency
Internal True-Differential Track/Hold (T/H)
External Reference
No Pipeline Delays
Small 12-Pin TQFN Package
Ordering Information
PART
TEMP RANGE PIN-
PACKAGE
INPUT
MAX1072ETC+T -40°C to +85°C 12 TQFN
Unipolar
MAX1075ETC+T -40°C to +85°C 12 TQFN
Bipolar
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
Typical Operating Circuit
TOP VIEW
AIN+ N.C. SCLK
12 11 10
AIN- 1
REF 2
RGND 3
MAX1072
MAX1075
9 CNVST
8 DOUT
7 VL
456
VDD N.C. GND
TQFN
SPI/QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
+4.75V TO +5.25V
+1.8V TO VDD
10μF
DIFFERENTIAL +
INPUT
VOLTAGE -
REF
4.7μF
0.01μF
0.01μF
VDD
0.01μF
VL
AIN+ DOUT
AIN-
MAX1072
MAX1075 CNVST
SCLK
REF
RGND
GND
10μF
μC/DSP
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.


Maxim Integrated Semiconductor Electronic Components Datasheet

MAX1072 Datasheet

(MAX1072 / MAX1075) 10-Bit ADCs

No Preview Available !

1.8Msps, Single-Supply, Low-Power,
True-Differential, 10-Bit ADCs
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +6V
VL to GND ...................-0.3V to the lower of (VDD + 0.3V) or +6V
Digital Inputs
to GND ....................-0.3V to the lower of (VDD + 0.3V) or +6V
Digital Output
to GND .......................-0.3V to the lower of (VL + 0.3V) or +6V
Analog Inputs and
REF to GND.............-0.3V to the lower of (VDD + 0.3V) or +6V
RGND to GND .......................................................-0.3V to +0.3V
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA = +70°C)
12-Pin TQFN (derate 16.9mW/°C above +70°C) ......1349mW
Operating Temperature Range
MAX107_ ETC.................................................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +5V ±5%, VL = VDD, VREF = 4.096V, fSCLK = 28.8MHz, 50% duty cycle, TA = -40°C to +85°C, unless otherwise noted. Typical
values are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
DC ACCURACY
Resolution
10 Bits
Relative Accuracy
INL (Note 1)
±0.5 LSB
Differential Nonlinearity
DNL (Note 2)
±0.5 LSB
Offset Error
±2 LSB
Offset-Error Temperature
Coefficient
±1 ppm/°C
Gain Error
Offset nulled
±2 LSB
Gain Temperature Coefficient
±2 ppm/°C
DYNAMIC SPECIFICATIONS (fIN = 525kHz sine wave, VIN = VREF, unless otherwise noted.)
Signal-to-Noise Plus Distortion
SINAD
60
Total Harmonic Distortion
THD
61
-80 -74
dB
dB
Spurious-Free Dynamic Range
SFDR
-80 -74
dB
Intermodulation Distortion
Full-Power Bandwidth
IMD fIN1 = 250kHz, fIN2 = 300kHz
-3dB point, small-signal method
-78 dB
20 MHz
Full-Linear Bandwidth
S/(N + D) > 56dB, single ended
2 MHz
CONVERSION RATE
Minimum Conversion Time
Maximum Throughput Rate
tCONV (Note 3)
0.556 μs
1.8 Msps
Minimum Throughput Rate
(Note 4)
10 ksps
Track-and-Hold Acquisition Time
Aperture Delay
tACQ
(Note 5)
104 ns
5 ns
Aperture Jitter
(Note 6)
30 ps
External Clock Frequency
fSCLK
28.8 MHz
2 _______________________________________________________________________________________


Part Number MAX1072
Description (MAX1072 / MAX1075) 10-Bit ADCs
Maker Maxim Integrated Products
Total Page 18 Pages
PDF Download

MAX1072 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 MAX107 Dual / 6-Bit / 400Msps ADC with On-Chip / Wideband Input Amplifier
Maxim
2 MAX1070 (MAX1070 / MAX1071) 10-Bit ADCs
Maxim Integrated Products
3 MAX1071 (MAX1070 / MAX1071) 10-Bit ADCs
Maxim Integrated Products
4 MAX1072 (MAX1072 / MAX1075) 10-Bit ADCs
Maxim Integrated Products
5 MAX1075 (MAX1072 / MAX1075) 10-Bit ADCs
Maxim Integrated Products
6 MAX1076 (MAX1076 / MAX1078) 10-Bit ADCs
Maxim Integrated Products
7 MAX1078 (MAX1076 / MAX1078) 10-Bit ADCs
Maxim Integrated Products





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy