Datasheet4U Logo Datasheet4U.com

MAX1075 - 10-Bit ADCs

Download the MAX1075 datasheet PDF. This datasheet also covers the MAX1072 variant, as both devices belong to the same 10-bit adcs family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX1072/MAX1075 low-power, high-speed, serialoutput, 10-bit, analog-to-digital converters (ADCs) operate at up to 1.8Msps.

These devices feature true-differential inputs, offering better noise immunity, distortion improvements, and a wider dynamic range over singleended inputs.

Key Features

  • MAX1072/MAX1075 Ordering Information PART MAX1072CTC-T MAX1072ETC-T MAX1075CTC-T MAX1075ETC-T TEMP RANGE 0°C to +70°C -40°C to +85°C 0°C to +70°C -40°C to +85°C.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX1072_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX107 Dual / 6-Bit / 400Msps ADC with On-Chip / Wideband Input Amplifier Maxim
MAX100 250Msps / 8-Bit ADC with Track/Hold Maxim
MAX1002 Low-Power / 60Msps / Dual / 6-Bit ADC Maxim
MAX1003 Low-Power / 90Msps / Dual 6-Bit ADC Maxim
MAX1005 IF Undersampler Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX1070 10-Bit ADCs
MAX1071 10-Bit ADCs
MAX1072 10-Bit ADCs
MAX1076 10-Bit ADCs
MAX1078 10-Bit ADCs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-3153; Rev 0; 1/04 1.8Msps, Single-Supply, Low-Power, True-Differential, 10-Bit ADCs General Description The MAX1072/MAX1075 low-power, high-speed, serialoutput, 10-bit, analog-to-digital converters (ADCs) operate at up to 1.8Msps. These devices feature true-differential inputs, offering better noise immunity, distortion improvements, and a wider dynamic range over singleended inputs. A standard SPI™/QSPI™/MICROWIRE™ interface provides the clock necessary for conversion. These devices easily interface with standard digital signal processor (DSP) synchronous serial interfaces. The MAX1072/MAX1075 operate from a single +4.75V to +5.25V supply voltage and require an external reference.