MAX11048 Datasheet | Maxim Integrated

19-5106; Rev 0; 12/09 .. KIT ATION EVALU E L B A AVAIL 4-/6-/8-Channel, 16-Bit, Simultaneous-Sampling ADCs General Description Features o o o o o o o o o o o 4-/6-/8-Channel 16-Bit ADC Single Analog and Digital Supply High-Impedance Inputs Up to 1GΩ On-Chip T/H Circuit for Each Channel Fast 3µs Conversion Time High Throughput: 250ksps for All 8 Channels 16-Bit, High-Speed, Parallel Interface Internal Clocked Conversions 10ns Aperture Delay 100ps Channel-to-Channel T/H Matching Low Drift, Accurate 4.096V Internal Reference Providing an Input Range of 0 to 5V o External Reference Range of 3.0V to 4.25V, Allowing Full-Scale Input Ranges of +3.7V to +5.2V o 56-Pin TQFN Package (8mm x 8mm) o Evaluation Kit Available MAX11047/MAX11048/MAX11049 The MAX11047/MAX11048/MAX11049 16-bit ADCs offer 4, 6, or 8 independent input channels. Featuring independent track and hold (T/H) and SAR circuitry, these parts provide simultaneous sampling at 250ksps for each channel. The MAX11047/MAX11048/MAX11049 accept a 0 to +5V input. All inputs are overrange protected with internal ±20m A input clamps providing overrange protection with a simple external resistor. Other Features include a 4MHz T/H input bandwidth, internal clock, and internal or external reference. A 20MHz, 16-bit, bidirectional, parallel interface provides the conversion results and accepts digital configuration inputs. The MAX11047/MAX11048/MAX11049 operate with a 4.75V to 5.25V analog supply and a separate flexible 2.7V to 5.25V digital supply for interfacing with the host without a level shifter. The MAX11047/MAX11048/MAX11049 are available in a 56-pin TQFN package and operate over the extended -40°C to +85°C temperature range. Applications Automatic Test Equipment Power-Factor Monitoring and Correction Power-Grid Protection Multiphase Motor Control Vibration and Waveform Analysis Ordering Information PART MAX11047ETN+ MAX11048ETN+ MAX11049ETN+ PIN-PACKAGE 56 TQFN-EP- 56 TQFN-EP- 56 TQFN-EP-...