Datasheet4U Logo Datasheet4U.com

MAX1186 - Low-Power ADC

Description

The MAX1186 is a 3V, dual 10-bit analog-to-digital converter (ADC) featuring fully-differential wideband trackand-hold (T/H) inputs, driving two pipelined, nine-stage ADCs.

Features

  • a 2.8mA sleep mode as well as a 1µA power-down mode to conserve power during idle periods. An internal 2.048V precision bandgap reference sets the full-scale range of the ADCs. A flexible reference structure allows the use of this internal or an externally derived reference, if desired for.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX118 +5V / 1Msps / 4 & 8-Channel / 8-Bit ADCs Maxim
MAX1180 Low-Power ADC Maxim
MAX1183 Low-Power ADC Maxim
MAX1185 Low-Power ADC Maxim
MAX1187 16-Bit / 135ksps / Single-Supply ADCs Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX11800 (MAX11800 - MAX11803) Ultra-Small Resistive Touch-Screen Controllers
MAX11801 (MAX11800 - MAX11803) Ultra-Small Resistive Touch-Screen Controllers
MAX11802 (MAX11800 - MAX11803) Ultra-Small Resistive Touch-Screen Controllers
MAX11803 (MAX11800 - MAX11803) Ultra-Small Resistive Touch-Screen Controllers
MAX1181 Low-Power ADC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-2263; Rev 0; 12/01 Dual 10-Bit, 40Msps, 3V, Low-Power ADC with Internal Reference and Multiplexed Parallel Outputs General Description The MAX1186 is a 3V, dual 10-bit analog-to-digital converter (ADC) featuring fully-differential wideband trackand-hold (T/H) inputs, driving two pipelined, nine-stage ADCs. The MAX1186 is optimized for low-power, high dynamic performance applications in imaging, instrumentation, and digital communication applications. This ADC operates from a single 2.7V to 3.6V supply, consuming only 105mW while delivering a typical signal-tonoise ratio (SNR) of 59.4dB at an input frequency of 20MHz and a sampling rate of 40Msps. Digital outputs A and B are updated alternating on the rising (CHA) and the falling (CHB) edge of the clock.
Published: |