Datasheet4U Logo Datasheet4U.com

MAX13013 - (MAX13013 - MAX13028) Single-/Dual-/Quad-Level Translators

General Description

The MAX13013 MAX13017/MAX3023

MAX3028 single-/ dual-/quad-level translators provide the level shifting necessary to allow 100Mbps data transfer in a multivoltage system.

Externally applied voltages, VCC and VL, set the logic levels on either side of the device.

Key Features

  • 100Mbps Guaranteed Data Rate.
  • Bidirectional Level Translation MAX13013 (Single) MAX13014 (Dual) MAX3023 (Quad).
  • Unidirectional Level Translation MAX13015/MAX13016/MAX13017 (Dual) MAX3024.
  • MAX3028 (Quad).
  • VL Operation Down to +1.2V.
  • Ultra-Low 0.1µA Supply Current When Disabled.
  • Low-Quiescent Current (0.1µA).
  • UCSP, SC70, SOT23, and TSSOP Packages MAX13013.
  • MAX13017/MAX3023.
  • MAX3028 Pin Configurations TOP VIEW VC.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX130 3 Digit A/D Converters with Bandgap Refrence Maxim
MAX13000E Ultra-Low-Voltage Level Translators Maxim Integrated
MAX13001E Ultra-Low-Voltage Level Translators Maxim Integrated
MAX13002E Ultra-Low-Voltage Level Translators Maxim Integrated
MAX13003E Ultra-Low-Voltage Level Translators Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX1301 Serial 16-Bit ADCs
MAX13014 (MAX13013 - MAX13028) Single-/Dual-/Quad-Level Translators
MAX13015 (MAX13013 - MAX13028) Single-/Dual-/Quad-Level Translators
MAX13016 (MAX13013 - MAX13028) Single-/Dual-/Quad-Level Translators
MAX13017 (MAX13013 - MAX13028) Single-/Dual-/Quad-Level Translators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-3266; Rev 1; 8/04 +1.2V to +3.6V, 0.1µA, 100Mbps, Single-/Dual-/Quad-Level Translators General Description The MAX13013–MAX13017/MAX3023–MAX3028 single-/ dual-/quad-level translators provide the level shifting necessary to allow 100Mbps data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. Logic signals present on the VL side of the device appear as a higher voltage logic signal on the VCC side of the device, and vice-versa. The MAX13013 single-, the MAX13014–MAX13017 dual-, and the MAX3023–MAX3028 (UCSP™ package) quad-level translators feature an enable (EN) input. The MAX3023–MAX3028 (TSSOP package) quad-level translators feature EN and EN inputs.