Datasheet4U Logo Datasheet4U.com

MAX13038 - (MAX13037 / MAX13038) Automotive Contact Monitor and Level Shifters

Download the MAX13038 datasheet PDF. This datasheet also covers the MAX13037 variant, as both devices belong to the same (max13037 / max13038) automotive contact monitor and level shifters family and are provided as variant models within a single manufacturer datasheet.

Description

The MAX13037/MAX13038 automotive contact monitor and level shifters monitor and debounce eight remote mechanical switches and assert an interrupt (INT) if a switch changes state.

The state of each switch is sampled through an SPI™ interface by reading the status register.

Features

  • o +6V to +26V Operating Voltage Range MAX13037/MAX13038.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX13037_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX130 3 Digit A/D Converters with Bandgap Refrence Maxim
MAX13000E Ultra-Low-Voltage Level Translators Maxim Integrated
MAX13001E Ultra-Low-Voltage Level Translators Maxim Integrated
MAX13002E Ultra-Low-Voltage Level Translators Maxim Integrated
MAX13003E Ultra-Low-Voltage Level Translators Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX1303 Serial 16-Bit ADCs
MAX13030E 6-Channel High SPeed LLT
MAX13031E 6-Channel High SPeed LLT
MAX13032E 6-Channel High SPeed LLT
MAX13033E 6-Channel High SPeed LLT

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com 19-1084; Rev 0; 11/07 Automotive Contact Monitor and Level Shifters with LDO Regulator General Description The MAX13037/MAX13038 automotive contact monitor and level shifters monitor and debounce eight remote mechanical switches and assert an interrupt (INT) if a switch changes state. The state of each switch is sampled through an SPI™ interface by reading the status register. Any switch can be prohibited from asserting an interrupt by writing to the command register. Four of the switch inputs are intended for ground-connected switches (IN0–IN3) and the other four inputs (IN4–IN7) are programmable in groups of two for either groundconnected or battery-connected switches.
Published: |