Datasheet4U Logo Datasheet4U.com

MAX13331 - (MAX13330 / MAX13331) Automotive DirectDrive Headphone Amplifiers

Download the MAX13331 datasheet PDF. This datasheet also covers the MAX13330 variant, as both devices belong to the same (max13330 / max13331) automotive directdrive headphone amplifiers family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX13330/MAX13331 stereo headphone amplifiers are designed for automotive applications requiring output short-circuit and ESD protection to battery/ground with diagnostics.

Key Features

  • MAX13330/MAX13331 Ordering Information.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX13330_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX13335E Dual Automotive Differential Audio Receivers Maxim Integrated
MAX13336E Dual Automotive Differential Audio Receivers Maxim Integrated
MAX133 3 Digit DMM Circuit Maxim
MAX130 3 Digit A/D Converters with Bandgap Refrence Maxim
MAX13000E Ultra-Low-Voltage Level Translators Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX1333 (MAX1332 / MAX1333) True-Differential 12-Bit ADCs
MAX13330 Automotive DirectDrive Headphone Amplifiers
MAX1330 12-/16-Bit DASs
MAX1332 (MAX1332 / MAX1333) True-Differential 12-Bit ADCs
MAX13325 Dual Automotive Audio Line Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4341; Rev 0; 10/08 www.DataSheet4U.com Automotive DirectDrive Headphone Amplifiers with Output Protection and Diagnostics General Description The MAX13330/MAX13331 stereo headphone amplifiers are designed for automotive applications requiring output short-circuit and ESD protection to battery/ground with diagnostics. These devices use Maxim’s unique, patented † DirectDrive ® architecture to produce a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving board space and component height. The gain of the amplifier is set internally (-1.5V/V) on the MAX13330 or adjusted externally with resistors on the MAX13331. The MAX13330/MAX13331 deliver 120mW per channel into a 16Ω load or 135mW into a 32Ω load and have a low 0.01% THD+N.