Datasheet4U Logo Datasheet4U.com

MAX13342E - (MAX13342E / MAX13345E) 3-Wire Interface Full Speed USB Transceivers

Description

The MAX13342E/MAX13345E USB-compliant transceivers are designed to minimize the area and external components required to interface low-voltage ASICs to USB.

The devices comply with USB 2.0 specification for full-speed-only (12Mbps) operation.

Features

  • o USB 2.0 (Full-Speed, 12Mbps)-Compliant Transceiver o Internal Pullup o VBUS Detection o Internal Series Resistors (MAX13345E) o ±15kV (HBM) ESD Protection on D+, D-, and VBUS o Enumeration Input Controls D+ Pullup Resistor o Supports 3-Wire DAT/SE0 Interface o +2.3V to +3.6V Interface Voltage (VL) o No Power-Supply Sequencing Required o Low USB Output Impedance (MAX13342E) MAX13342E/MAX13345E Ordering Information PART MAX13342EETD+ MAX13342EEBC+.
  • MAX13345EETD+ MAX13345EEBC+.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX133 3 Digit DMM Circuit Maxim
MAX13335E Dual Automotive Differential Audio Receivers Maxim Integrated
MAX13336E Dual Automotive Differential Audio Receivers Maxim Integrated
MAX130 3 Digit A/D Converters with Bandgap Refrence Maxim
MAX13000E Ultra-Low-Voltage Level Translators Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX13345E (MAX13342E / MAX13345E) 3-Wire Interface Full Speed USB Transceivers
MAX1330 12-/16-Bit DASs
MAX1332 (MAX1332 / MAX1333) True-Differential 12-Bit ADCs
MAX13325 Dual Automotive Audio Line Drivers
MAX13326 Dual Automotive Audio Line Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-0621; Rev 0; 10/06 3-Wire Interface Full-Speed USB Transceivers With/Without Internal Series Resistors General Description The MAX13342E/MAX13345E USB-compliant transceivers are designed to minimize the area and external components required to interface low-voltage ASICs to USB. The devices comply with USB 2.0 specification for full-speed-only (12Mbps) operation. The transceivers include an internal 3.3V regulator, an internal 1.5kΩ D+ pullup resistor, and built-in ±15kV ESD protection circuitry to protect the USB I/0 ports (D+,D-). The MAX13345E also has internal series resistors, allowing it to be wired directly to a USB connector. These devices operate with logic-supply voltages as low as +2.3V, ensuring compatibility with low-voltage ASICs.
Published: |