Datasheet4U Logo Datasheet4U.com

MAX13486E - (MAX13485E / MAX13486E) Half Duplex Transceiveer

This page provides the datasheet information for the MAX13486E, a member of the MAX13485E (MAX13485E / MAX13486E) Half Duplex Transceiveer family.

Description

The MAX13485E/MAX13486E +5V, half-duplex, ±15kV ESD-protected RS-485 transceivers feature one driver and one receiver.

These devices include fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted.

Features

  • reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free transmission up to 500kbps. The MAX13486E driver slew rate is not limited, allowing transmit speeds up to 16Mbps. The MAX13485E/MAX13486E feature a 1/4-unit load receiver input impedance, allowing up to 128 transceivers on the bus. These devices are intended for half-duplex communications. All driver outputs are protected to ±15kV ESD using the Human Body Model. The MAX1.

📥 Download Datasheet

Datasheet preview – MAX13486E

📁 Similar Datasheet

  • MAX13487E - Half-Duplex RS-485-Compatible Transceiver (Analog Devices)
  • MAX13488E - Half-Duplex RS-485-Compatible Transceiver (Analog Devices)
  • MAX134 - 3 Digit DMM Circuit (Maxim)
  • MAX1343 - Multichannel ADCs/DACs (Maxim Integrated)
  • MAX130 - 3 Digit A/D Converters with Bandgap Refrence (Maxim)
  • MAX13000E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX13001E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX13002E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX13003E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX13004E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
Other Datasheets by Maxim Integrated Products
  • MAX13481E - (MAX13481E - MAX13483E) ESD-Protected USB Transceivers
  • MAX13482E - (MAX13481E - MAX13483E) ESD-Protected USB Transceivers
  • MAX13483E - (MAX13481E - MAX13483E) ESD-Protected USB Transceivers
  • MAX13485E - (MAX13485E / MAX13486E) Half Duplex Transceiveer
  • MAX13487E - Half-Duplex RS-485-/RS-422- Compatible Transceiver
  • MAX13488E - Half-Duplex RS-485-/RS-422- Compatible Transceiver
  • MAX13430E - RS-485 Transceivers
  • MAX13431E - RS-485 Transceivers

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com 19-0742; Rev 0; 1/07 Half-Duplex RS-485/RS-422 Transceivers in µDFN General Description The MAX13485E/MAX13486E +5V, half-duplex, ±15kV ESD-protected RS-485 transceivers feature one driver and one receiver. These devices include fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logichigh if all transmitters on a terminated bus are disabled (high impedance). The MAX13485E/MAX13486E include a hot-swap capability to eliminate false transitions on the bus during power-up or live-insertion. The MAX13485E features reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free transmission up to 500kbps.
Published: |