Datasheet4U Logo Datasheet4U.com

MAX13487E - Half-Duplex RS-485-/RS-422- Compatible Transceiver

Description

The MAX13487E/MAX13488E +5V, half-duplex, ±15kV ESD-protected RS-485/RS-422-compatible transceivers feature one driver and one receiver.

The MAX13487E/ MAX13488E include a hot-swap capability to eliminate false transitions on the bus during power-up or live insertion.

Features

  • reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free transmission up to 500kbps. The MAX13488E driver slew rate is not limited, allowing transmit speeds up to 16Mbps. The MAX13487E/MAX13488E feature a 1/4-unit load receiver input impedance, allowing up to 128 transceivers on the bus. These devices are intended for halfduplex communications. All driver outputs are protected to ±15kV ESD using the Human Body Model. The MAX13.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX13487E Half-Duplex RS-485-Compatible Transceiver Analog Devices
MAX13488E Half-Duplex RS-485-Compatible Transceiver Analog Devices
MAX134 3 Digit DMM Circuit Maxim
MAX1343 Multichannel ADCs/DACs Maxim Integrated
MAX130 3 Digit A/D Converters with Bandgap Refrence Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX13481E (MAX13481E - MAX13483E) ESD-Protected USB Transceivers
MAX13482E (MAX13481E - MAX13483E) ESD-Protected USB Transceivers
MAX13483E (MAX13481E - MAX13483E) ESD-Protected USB Transceivers
MAX13485E (MAX13485E / MAX13486E) Half Duplex Transceiveer
MAX13486E (MAX13485E / MAX13486E) Half Duplex Transceiveer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX13487E/MAX13488E EVALUATION KIT AVAILABLE Half-Duplex RS-485-/RS-422Compatible Transceiver with AutoDirection Control General Description The MAX13487E/MAX13488E +5V, half-duplex, ±15kV ESD-protected RS-485/RS-422-compatible transceivers feature one driver and one receiver. The MAX13487E/ MAX13488E include a hot-swap capability to eliminate false transitions on the bus during power-up or live insertion. The MAX13487E/MAX13488E feature Maxim’s proprietary AutoDirection control. This architecture makes the devices ideal for applications, such as isolated RS-485 ports, where the driver input is used in conjunction with the driver-enable signal to drive the differential bus.
Published: |