Datasheet4U Logo Datasheet4U.com

MAX1362 - 4-Channel 10-Bit System Monitors

This page provides the datasheet information for the MAX1362, a member of the MAX1361 4-Channel 10-Bit System Monitors family.

Description

The MAX1361/MAX1362 low-power, 10-bit, 4-channel, analog-to-digital converters (ADCs) feature a digitally programmable window comparator with an interrupt output for automatic system-monitoring applications.

Features

  • a 2.048V internal reference, and the MAX1362 features a 4.096V internal reference. The MAX1361/MAX1362 are available in a 10-pin µMAX® package and are specified over the extended (-40°C to +85°C) temperature range. For 12-bit.

📥 Download Datasheet

Datasheet preview – MAX1362

📁 Similar Datasheet

  • MAX136 - Digit A/D Converter (Maxim)
  • MAX130 - 3 Digit A/D Converters with Bandgap Refrence (Maxim)
  • MAX13000E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX13001E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX13002E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX13003E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX13004E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX13005E - Ultra-Low-Voltage Level Translators (Maxim Integrated)
  • MAX1304 - 8-/4-/2-Channel / 12-Bit / Simultaneous-Sampling ADCs (Maxim)
  • MAX1305 - 8-/4-/2-Channel / 12-Bit / Simultaneous-Sampling ADCs (Maxim)
Other Datasheets by Maxim Integrated Products
  • MAX1361 - 4-Channel 10-Bit System Monitors
  • MAX1363 - 4-Channel 12-Bit System Monitors
  • MAX1364 - 4-Channel 12-Bit System Monitors
  • MAX1365 - Digit Panel Meters
  • MAX1367 - Digit Panel Meters
  • MAX1300 - Serial 16-Bit ADCs
  • MAX1301 - Serial 16-Bit ADCs
  • MAX13013 - (MAX13013 - MAX13028) Single-/Dual-/Quad-Level Translators

Full PDF Text Transcription

Click to expand full text
19-3268; Rev 3; 4/06 www.DataSheet4U.com 4-Channel, 10-Bit, System Monitors with Programmable Trip Window and SMBus Alert Response General Description The MAX1361/MAX1362 low-power, 10-bit, 4-channel, analog-to-digital converters (ADCs) feature a digitally programmable window comparator with an interrupt output for automatic system-monitoring applications. Once configured, monitor mode automatically asserts an interrupt when any analog input exceeds the programmed upper or lower thresholds, without interaction to the host. The MAX1361/MAX1362 respond to the SMBus™ alert, allowing quick identification of the alarming device on a shared interrupt. A programmable delay between monitoring intervals lowers power consumption at reduced monitoring rates.
Published: |