Datasheet4U Logo Datasheet4U.com

MAX14530E - (MAX14529E / MAX14530E) Overvoltage Protection

Download the MAX14530E datasheet PDF. This datasheet also covers the MAX14529E variant, as both devices belong to the same (max14529e / max14530e) overvoltage protection family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX14529E/MAX14530E are overvoltage-protection devices with USB charger detection, a low-dropout (LDO) regulator, and ESD protection.

These devices feature a low 35mΩ (typ) RON internal FET switch and protect low-voltage systems against voltage faults up to 28V.

Key Features

  • a 100mA (min) current capability and low output noise. The MAX14529E/MAX14530E feature ±15kV HBM ESD protection with low (3pF) capacitance suitable for Hi-Speed USB 2.0. Both devices are offered in a small 12-bump, 1.5mm x 2mm WLP package and operate over the -40°C to +85°C extended temperature range. PART Features.
  • Input Voltage Protection Up to 28V.
  • High-Current USB Charger Detection.
  • 3.3V, 100mA LDO.
  • Preset Overvoltage Protection Trip Level 5.75V (MAX14529.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX14529E_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

Full PDF Text Transcription for MAX14530E (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for MAX14530E. For precise diagrams, and layout, please refer to the original PDF.

19-4459; Rev 0; 2/09 www.DataSheet4U.com Overvoltage Protection with USB Charger Detection, LDO, and ESD Protection on D+/DGeneral Description The MAX14529E/MAX14530E are...

View more extracted text
ESD Protection on D+/DGeneral Description The MAX14529E/MAX14530E are overvoltage-protection devices with USB charger detection, a low-dropout (LDO) regulator, and ESD protection. These devices feature a low 35mΩ (typ) RON internal FET switch and protect low-voltage systems against voltage faults up to 28V. When the input voltage exceeds the overvoltage threshold, the internal FET switch is turned off to prevent damage to the protected components. The charger detection detects a short between the USB D+ and D- data lines. If the data lines are shorted together and a dedicated charger is attached, the phone draws more than

More Datasheets from Maxim Integrated (now Analog Devices)

Part Number Description
MAX14531E USB 2.0 Hi-Speed And Audio Switches
MAX14532E USB 2.0 Hi-Speed And Audio Switches
MAX14533E USB 2.0 Hi-Speed And Audio Switches
MAX14534E USB 2.0 Hi-Speed And Audio Switches
MAX14535E DOCSIS 3.0 Upstream Amplifier
MAX14536E DOCSIS 3.0 Upstream Amplifier
MAX14537E DOCSIS 3.0 Upstream Amplifier
MAX14538E DOCSIS 3.0 Upstream Amplifier
MAX14539E DOCSIS 3.0 Upstream Amplifier
MAX14500 Hi-Speed USB-to-SD Card Readers