Datasheet4U Logo Datasheet4U.com

MAX15001 - Current-Mode PWM Controllers

Download the MAX15001 datasheet PDF. This datasheet also covers the MAX15000 variant, as both devices belong to the same current-mode pwm controllers family and are provided as variant models within a single manufacturer datasheet.

Description

The MAX15000/MAX15001 current-mode PWM controllers contain all the control circuitry required for the design of wide-input-voltage isolated and nonisolated power supplies.

The MAX15000 is well suited for universal input (rectified 85VAC to 265VAC) or telecom (-36VDC to -72VDC) power supplies.

Features

  • rrent-Mode Control Programmable Switching Frequency Up to 625kHz Accurate UVLO Threshold (1%) Open-Drain UVLO Flag Output with Internal Delay 36V to 72V Telecom Voltage Range Universal Offline Input Voltage Range Rectified 85VAC to 265VAC (MAX15000) 9.5V to 24V Input (MAX15001) Digital Soft-Start Internal Bootstrap UVLO with Large Hysteresis (MAX15000) Internal Error Amplifier with 1.5% Accurate Reference 50µA (typ) Startup Supply Current 50% Maximum Duty-Cycle Limit (MAX15000A/MAX15001A) 75% Ma.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX15000_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX15002 Dual-Output Buck Controller Maxim Integrated
MAX15004A 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers Maxim Integrated
MAX15004B 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers Maxim Integrated
MAX15005A 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers Maxim Integrated
MAX15005B 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX15000 Current-Mode PWM Controllers
MAX15003 Triple-Output Buck Controller
MAX15004 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers
MAX15005 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers
MAX15006 ultra-low quiescent-current linear regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-3957; Rev 0; 1/06 Current-Mode PWM Controllers with Programmable Switching Frequency General Description The MAX15000/MAX15001 current-mode PWM controllers contain all the control circuitry required for the design of wide-input-voltage isolated and nonisolated power supplies. The MAX15000 is well suited for universal input (rectified 85VAC to 265VAC) or telecom (-36VDC to -72VDC) power supplies. The MAX15001 is well suited for low input voltage (9.5VDC to 24VDC) power supplies. The MAX15000/MAX15001 contain an internal error amplifier that regulates the tertiary winding output voltage which is used in primary-side-regulated isolated power supplies. Primary-side regulation eliminates the need for an optocoupler.
Published: |