MAX15101 Datasheet | Maxim Integrated

.DataSheet.co.kr 19-6154; Rev 0; 12/11 EVALUATION KIT AVAILABLE MAX15101 Small 1A, Low-Dropout Linear Regulator in a 2.7mm x 1.6mm Package General Description The MAX15101 is a small, low-dropout linear regulator optimized for networking, data, and server applications. The regulator delivers up to 1A from a 1.7V to 5.5V input supply with output accuracy of Q1.6%. The output is adjustable down to 0.6V with a guaranteed dropout voltage of less than 100mV at full load. The internal p-channel switch is protected with a foldback current limit and thermal shutdown. The MAX15101 Features an external bypass input to reduce noise. This bypass input also serves as a softstart control. An enable input and power-good output are included for power sequence control. The MAX15101 is available in a 1.6mm x 2.7mm WLP package and is fully specified from the -40NC to +85NC operating temperature range. S 1.7V to 5.5V Operating Range S 100mV Dropout Guaranteed at 1A S ±1.6% Output Accuracy Over Line, Load, and Temperature S Adjustable Output from 0.6V to 5.2V S Foldback Current Protection S Thermal Shutdown Protection S Low Noise 15µVRMS (typ) S Small 1.6mm x 2.7mm WLP Package Features Applications Networking Tele/Data Servers Base Stations PLL Power Ordering Information appears at end of data sheet. For related parts and remended products to use with this part, refer to .maxim-ic./MAX15101.related.   Typical Operating Circuit INPUT (1.7V TO 5.5V) IN CIN 2.2µF EN OUT OUTPUT (0.6V TO VIN - 200mV) MAX15101 R1 0 TO 4.6kI COUT 10µF PG POWER-GOOD OUTPUT GND FB SS_BYP CSS 100nF R2 600I - - - - - - - - - - - - - - -...