MAX19588
MAX19588 is High-Dynamic-Range ADC manufactured by Maxim Integrated.
Description
Features
- 100Msps Conversion Rate
- -82d BFS Noise Floor
- Excellent Low-Noise Characteristics SNR = 79.4d B at f IN = 10MHz SNR = 79d B at f IN = 70MHz
- Excellent Dynamic Range (SFDR1/SFDR2) 93.2d Bc/102.5d Bc at f IN = 10MHz 82.1d Bc/97.7d Bc at f IN = 70MHz
- Less than 0.1ps Sampling Jitter
- 1275m W Power Dissipation
- 2.56VP-P Fully Differential Analog Input Voltage Range
- CMOS-patible Two’s-plement Data Output
- Separate Data Valid Clock and Over-Range Outputs
- Flexible Input Clock Buffer
- Small 56-Pin, 8mm x 8mm x 0.8mm Thin QFN Package
- EV Kit Available for MAX19588 (Order MAX19588EVKIT)
The MAX19588 is a 3.3V, high-speed, high-performance analog-to-digital converter (ADC) featuring a fully differential wideband track-and-hold (T/H) and a 16-bit converter core. The MAX19588 is optimized for multichannel, multimode receivers, which require the ADC to meet very stringent dynamic performance requirements. With a -82d BFS noise floor, the MAX19588 allows for the design of receivers with superior sensitivity requirements. At 100Msps, the MAX19588 achieves a 79d B signal-tonoise ratio (SNR) and an 82.1d Bc/97.7d Bc single-tone spurious-free dynamic range performance (SFDR1/ SFDR2) at f IN = 70MHz. The MAX19588 is not only optimized for excellent dynamic performance in the 2nd Nyquist region, but also for high-IF input frequencies. For instance, at 130MHz, the MAX19588 achieves an 82.3d Bc SFDR and its SNR performance stays flat (within 2.3d B) up to 175MHz. This level of performance makes the part ideal for high-performance digital receivers. The MAX19588 operates from a 3.3V analog supply voltage and a 1.8V digital voltage, features a 2.56VP-P full-scale input range, and allows for a guaranteed sampling speed of up to 100Msps. The input track-and-hold stage operates with a 600MHz full-scale, full-power bandwidth. The MAX19588 features parallel, low-voltage CMOSpatible outputs in two’s-plement output format. The MAX19588 is manufactured in an 8mm x 8mm,...
