Datasheet4U Logo Datasheet4U.com

MAX2021 - High Dynamic Range Direct Up/Down Conversion Quadrature Mod/Demod

Description

The MAX2021 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for RFID handheld and portal readers, as well as single and multicarrier 750MHz to 1200MHz GSM/EDGE, cdma2000 ® , WCDMA, and iDEN ® base-station applications.

Features

  • 750MHz to 1200MHz RF Frequency Range.
  • Scalable Power: External Current-Setting Resistors Provide Option for Operating Device in Reduced-Power/Reduced-Performance Mode.
  • 36-Pin, 6mm x 6mm TQFN Provides High Isolation in a Small Package Modulator Operation:.
  • Meets 4-Carrier WCDMA 65dBc ACLR.
  • +21dBm Typical OIP3.
  • +58dBm Typical OIP2.
  • +16.7dBm Typical OP1dB.
  • -32dBm Typical LO Leakage.
  • 43.5dBc Typical Sideband Suppressio.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX202 5-V Dual RS-232 Line Driver/Receiver Texas Instruments
MAX202 +5V-Powered / Multichannel RS-232 Drivers/Receivers Maxim
MAX2022 Direct Up/Downconversion 1500MHz to 3000MHz Quadrature Modulator/Demodulator Maxim Integrated
MAX2027 IF Digitally Controlled Variable-Gain Amplifier Maxim Integrated
MAX2029 815MHz to 1000MHz Upconversion/Downconversion Mixer Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX2023 High Dynamic Range Direct Up-/Down Conversion
MAX202E 5V RS-232 Transceivers
MAX2010 500MHz to 1100MHz Adjustable RF Predistorter
MAX2014 75dB Logarithmic Detector/Controller
MAX2016 LF-to-2.5GHz Dual Logarithmic Detector/Controller

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com 19-3918; Rev 0; 3/06 ILABLE N KIT AVA EVALUATIO High-Dynamic-Range, Direct Up-/Downconversion 750MHz to 1200MHz Quadrature Mod/Demod General Description The MAX2021 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for RFID handheld and portal readers, as well as single and multicarrier 750MHz to 1200MHz GSM/EDGE, cdma2000 ® , WCDMA, and iDEN ® base-station applications. Direct conversion architectures are advantageous since they significantly reduce transmitter or receiver cost, part count, and power consumption as compared to traditional IF-based double conversion systems. In addition to offering excellent linearity and noise performance, the MAX2021 also yields a high level of component integration.
Published: |