Datasheet4U Logo Datasheet4U.com

MAX2067 - Serial/Analog-Controlled VGA

Description

The MAX2067 high-linearity analog variable-gain amplifier (VGA) is a monolithic SiGe BiCMOS attenuator and amplifier designed to interface with 50Ω systems operating in the 50MHz to 1000MHz frequency range (see the Typical Application Circuit).

Features

  • include 22dB amplifier gain (amplifier only), 4dB NF at maximum gain (includes attenuator insertion loss), and a high OIP3 level of +43dBm. Each of these features makes the MAX2067 an ideal VGA for numerous receiver and transmitter.

📥 Download Datasheet

📁 Similar Datasheet

  • MAX206 - +5V RS-232 Transceivers with 0.1uF External Capacitors (Maxim)
  • MAX2064 - Serial/Analog-Controlled VGA (Maxim Integrated)
  • MAX206E - 5V RS-232 Transceivers (Analog Devices)
  • MAX200 - RS-232 Transceivers (Maxim)
  • MAX20002 - 2A/3A Fully Integrated Step-Down Converters (Maxim Integrated)
  • MAX20003 - 2A/3A Fully Integrated Step-Down Converters (Maxim Integrated)
  • MAX20011E - Automotive Single 8A Step-Down Converters (Analog Devices)
  • MAX20011F - Automotive Single 12A Step-Down Converters (Analog Devices)
  • MAX20011G - Automotive Single 16A Step-Down Converters (Analog Devices)
  • MAX20021 - Step-Down DC-DC Converters (Maxim Integrated)
Other Datasheets by Maxim Integrated Products
  • MAX2063 - Serial/Parallel-Controlled Digital VGA
  • MAX2065 - Serial/ Parallel-Controlled Analog/Digital VGA
  • MAX2066 - Serial/Parallel-Controlled Digital VGA
  • MAX206E - 5V RS-232 Transceivers
  • MAX2010 - 500MHz to 1100MHz Adjustable RF Predistorter
  • MAX2014 - 75dB Logarithmic Detector/Controller
  • MAX2016 - LF-to-2.5GHz Dual Logarithmic Detector/Controller
  • MAX2021 - High Dynamic Range Direct Up/Down Conversion Quadrature Mod/Demod

Full PDF Text Transcription

Click to expand full text
19-4080; Rev 0; 4/08 www.DataSheet4U.com 50MHz to 1000MHz High-Linearity, Serial/Analog-Controlled VGA General Description The MAX2067 high-linearity analog variable-gain amplifier (VGA) is a monolithic SiGe BiCMOS attenuator and amplifier designed to interface with 50Ω systems operating in the 50MHz to 1000MHz frequency range (see the Typical Application Circuit). The analog attenuator is controlled using an external voltage or through the SPI™-compatible interface using an on-chip 8-bit DAC. Because each stage has its own RF input and RF output, this component can be configured to either optimize NF (amplifier configured first), or OIP3 (amplifier last).
Published: |