Datasheet4U Logo Datasheet4U.com

MAX2395 - WCDMA Quasi-Direct Modulator

Features

  • o 5% EVM for POUT = +6dBm o 1920MHz to 1980MHz Operation o +2.7V to +3.3V Single-Supply Operation o +6dBm Output Power at 72mA o 81dB Minimum Automatic Gain-Control (AGC) Range o Automatic ICC Throttle Back for Optimal Power Consumption o No IF SAW Filter Necessary o On-Chip RF PLL, with Fully Monolithic VCO o Ultra-Low External Component Count MAX2395 The MAX2395 fully monolithic quasi-direct modulator IC is designed for use in WCDMA/UMTS transmitters. The quasi-direct modulation architecture.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX230 Multichannel RS-232 Drivers/Receivers Maxim
MAX2306 CDMA IF VGAs and I/Q Demodulators Maxim Integrated
MAX2308 CDMA IF VGAs and I/Q Demodulators Maxim Integrated
MAX2309 CDMA IF VGAs and I/Q Demodulators Maxim Integrated
MAX231 Multichannel RS-232 Drivers/Receivers Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX239 +5V-Powered / Multichannel RS-232 Drivers/Receivers
MAX232E 5V RS-232 Transceivers
MAX2335 450MHz CDMA/OFDM LNA/Mixer
MAX2338 Triple/Dual-Mode CDMA LNA/Mixers
MAX233A +5V-Powered / Multichannel RS-232 Drivers/Receivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2970; Rev 3; 1/09 www.DataSheet4U.com KIT ATION EVALU E L B AVAILA WCDMA Quasi-Direct Modulator with VGA and PA Driver General Description Features o 5% EVM for POUT = +6dBm o 1920MHz to 1980MHz Operation o +2.7V to +3.3V Single-Supply Operation o +6dBm Output Power at 72mA o 81dB Minimum Automatic Gain-Control (AGC) Range o Automatic ICC Throttle Back for Optimal Power Consumption o No IF SAW Filter Necessary o On-Chip RF PLL, with Fully Monolithic VCO o Ultra-Low External Component Count MAX2395 The MAX2395 fully monolithic quasi-direct modulator IC is designed for use in WCDMA/UMTS transmitters. The quasi-direct modulation architecture reduces system cost, component count, and board space compared to transmitters using an IF SAW filter with IF VCO and IF synthesizer blocks.
Published: |