Datasheet4U Logo Datasheet4U.com

MAX2657 - (MAX2657 / MAX2658) GPS/GNSS Low-Noise Amplifiers

Description

The MAX2657/MAX2658 high-gain, low-noise amplifiers (LNAs) are designed for GPS L1, Galileo, and GLONASS applications.

Features

  • High-Power Gain: 19dB (MAX2657).
  • Ultra-Low-Noise Figure: 0.8dB.
  • Integrated 50Ω Output Matching Circuit.
  • Low Supply Current: 4.1mA (MAX2657).
  • Wide Supply Voltage Range: 1.6V to 3.3V.
  • Low Bill of Materials: One Inductor, Two Capacitors.
  • Small Footprint: 0.86mm x 1.26mm.
  • Thin Profile: 0.65mm.
  • 0.4mm-Pitch Wafer-Level Package (WLP) Ordering Information PART TEMP RANGE PIN-.

📥 Download Datasheet

Datasheet preview – MAX2657

📁 Similar Datasheet

  • MAX265 - Pin and Resistor Programmed Universal Active Filters (Maxim)
  • MAX2650 - +5V Low-Noise Amplifier (Maxim)
  • MAX2651 - Low-Noise Amplifiers (Maxim)
  • MAX2652 - Low-Noise Amplifiers (Maxim)
  • MAX2653 - Low-Noise Amplifiers (Maxim)
  • MAX2654 - 1575MHz/1900MHz Variable-IP3 Low-Noise Amplifiers (Maxim)
  • MAX2655 - 1575MHz/1900MHz Variable-IP3 Low-Noise Amplifiers (Maxim Integrated)
  • MAX2656 - 1575MHz/1900MHz Variable-IP3 Low-Noise Amplifiers (Maxim Integrated)
  • MAX2659 - GPS/GNSS Low-Noise Amplifier (Maxim Integrated)
  • MAX260 - Microprocessor Programmable Universal Active Filters (Maxim Integrated)
Other Datasheets by Maxim Integrated Products
  • MAX2658 - (MAX2657 / MAX2658) GPS/GNSS Low-Noise Amplifiers
  • MAX2622 - Monolithic Voltage-Controlled Oscillators
  • MAX2623 - Monolithic Voltage-Controlled Oscillators
  • MAX2624 - (MAX2622 - MAX2624) Monolithic Voltage-Controlled Oscillators
  • MAX2634 - 315MHz/433MHz Low-Noise Amplifier
  • MAX2645 - SiGe Low-Noise Amplifier/PA Predriver
  • MAX2664 - VHF/UHF Low-Noise Amplifiers
  • MAX2665 - VHF/UHF Low-Noise Amplifiers

Full PDF Text Transcription

Click to expand full text
MAX2657/MAX2658 EVALUATION KIT AVAILABLE GPS/GNSS Low-Noise Amplifiers General Description The MAX2657/MAX2658 high-gain, low-noise amplifiers (LNAs) are designed for GPS L1, Galileo, and GLONASS applications. Designed in Maxim's advanced SiGe process, the devices achieve a high gain and an ultra-lownoise figure while maximizing the input-referred 1dB compression point and the 3rd-order intercept point. The MAX2657/MAX2658 operate from a +1.6V to +3.3V single supply. The MAX2657 is optimized for low current. The MAX2658 is optimized for high linearity. The shutdown feature in the device reduces the supply current to be less than 1µA. The MAX2657/MAX2658 are available in a very small, lead-free, RoHS-compliant, 0.86mm x 1.26mm x 0.65mm, wafer-level package (WLP).
Published: |