Datasheet4U Logo Datasheet4U.com

MAX2664 - VHF/UHF Low-Noise Amplifiers

Description

The MAX2664 and MAX2665 are ultra-compact LNAs for VHF/UHF applications.

These devices incorporate a broadband LNA with an integrated bypass switch.

The MAX2664 covers the UHF frequency range from 470MHz to 860MHz, and the MAX2665 covers the VHF frequency range from 75MHz to 230MHz.

Features

  • UHF and VHF Frequency Range.
  • MAX2664: 470MHz to 860MHz.
  • MAX2665: 75MHz to 230MHz.
  • Low Noise Figure.
  • MAX2664: 1.

📥 Download Datasheet

Datasheet preview – MAX2664

📁 Similar Datasheet

  • MAX266 - Pin and Resistor Programmed Universal Active Filters (Maxim)
  • MAX2660 - 400MHz to 2.5GHz Upconverter Mixers (Maxim)
  • MAX2661 - 400MHz to 2.5GHz Upconverter Mixers (Maxim)
  • MAX2663 - 400MHz to 2.5GHz Upconverter Mixers (Maxim)
  • MAX2667 - GPS/GNSS Ultra-Low-Noise-Figure LNAs (Maxim Integrated)
  • MAX2669 - GPS/GNSS Ultra-Low-Noise-Figure LNAs (Maxim Integrated)
  • MAX260 - Microprocessor Programmable Universal Active Filters (Maxim Integrated)
  • MAX2601 - 1W RF Power Transistors (Maxim)
  • MAX2602 - 1W RF Power Transistors (Maxim)
  • MAX2605 - Integrated IF VCOs (Maxim)
Other Datasheets by Maxim Integrated Products
  • MAX2665 - VHF/UHF Low-Noise Amplifiers
  • MAX2622 - Monolithic Voltage-Controlled Oscillators
  • MAX2623 - Monolithic Voltage-Controlled Oscillators
  • MAX2624 - (MAX2622 - MAX2624) Monolithic Voltage-Controlled Oscillators
  • MAX2634 - 315MHz/433MHz Low-Noise Amplifier
  • MAX2645 - SiGe Low-Noise Amplifier/PA Predriver
  • MAX2657 - (MAX2657 / MAX2658) GPS/GNSS Low-Noise Amplifiers
  • MAX2658 - (MAX2657 / MAX2658) GPS/GNSS Low-Noise Amplifiers

Full PDF Text Transcription

Click to expand full text
MAX2664/MAX2665 EVALUATION KIT AVAILABLE VHF/UHF Low-Noise Amplifiers General Description The MAX2664 and MAX2665 are ultra-compact LNAs for VHF/UHF applications. These devices incorporate a broadband LNA with an integrated bypass switch. The MAX2664 covers the UHF frequency range from 470MHz to 860MHz, and the MAX2665 covers the VHF frequency range from 75MHz to 230MHz. Each device has a zero-power bypass mode for improved high-signal-level handling conditions. Additionally, the output port is internally matched to 50Ω while a single external inductor is used to match the input port to 50Ω. The MAX2664 and MAX2665 are available in a 4-bump (0.8mm x 0.8mm x 0.64mm), lead-free, wafer-level package (WLP).
Published: |