Datasheet4U Logo Datasheet4U.com

MAX3353E - USB On-the-Go Charge Pump

Description

The MAX3353E I 2 C™-compatible USB On-The-Go (OTG) regulated charge pump with switchable pullup/pulldown resistors allows peripherals and mobile devices such as PDAs, cellular phones, and digital cameras to be interconnected without a host PC.

Features

  • o Ideal for Enabling USB Dual-Role Components for USB OTG Protocol o Charge Pump for VBUS Signaling and Operation Down to +2.6V o Level Translators Allow Low-Voltage System Interface o Internal VBUS Comparators and ID Detector o Internal Switchable Pullup and Pulldown Resistors for Host/Peripheral Functionality o I2C-Compatible Bus Interface with Command and Status Registers o Interrupt Features o ±15kV ESD Protection on ID_IN, VBUS, D+, and Do Supports SRP and HNP o Available in 5 x 4 UCSP and.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX335 Serial Controlled / 8-Channel SPST Switch Maxim
MAX331 460kbps / 1A Supply Current / RS-232-Compatible Transceivers Maxim
MAX3311 460kbps / 1A Supply Current / RS-232-Compatible Transceivers Maxim
MAX3311E RS-232-Compatible Transceivers Maxim
MAX3313 460kbps / 1A Supply Current / RS-232-Compatible Transceivers Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX3355E 15kV ESD-Protected USB On-the-Go Charge Pump and Comparators
MAX3301E (MAX3301E / MAX3302E) USB On-the-Go Transceiver and Charge Pump
MAX3302E (MAX3301E / MAX3302E) USB On-the-Go Transceiver and Charge Pump
MAX3322E RS-232 Transceivers
MAX3323E RS-232 Transceivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-2845; Rev 1; 10/03 USB On-the-Go Charge Pump with Switchable Pullup/Pulldown Resistors General Description The MAX3353E I 2 C™-compatible USB On-The-Go (OTG) regulated charge pump with switchable pullup/pulldown resistors allows peripherals and mobile devices such as PDAs, cellular phones, and digital cameras to be interconnected without a host PC. The MAX3353E enables a system with an integrated USB dual-role transceiver to function as a USB OTG dual-role device. The charge pump in the MAX3353E supplies VBUS power and signaling that is required by the transceiver as defined in On-The-Go Supplement: USB 2.0, Revision 1.0. The MAX3353E provides the switchable pullup and pulldown resistors on D+ and Drequired for a dual-role device.
Published: |