Datasheet4U Logo Datasheet4U.com

MAX34561 - 12V/5V Hot-Plug Switch

Description

The MAX34561 is a dual, self-contained, hot-plug switch intended to be used on +12V and +5V power rails to limit through current and to control the power-up output-voltage ramp.

Features

  • S Completely Integrated Hot-Plug Functionality for MAX34561 Operation Ordering Information PART MAX34561T+ MAX34561T+T TEMP RANGE -40NC to +85NC -40NC to +85NC PIN-.

📥 Download Datasheet

Datasheet preview – MAX34561

📁 Similar Datasheet

  • MAX3456E - ESD-Protected USB Transceivers (Maxim Integrated)
  • MAX3450E - ESD-Protected USB Transceivers (Maxim Integrated)
  • MAX3451E - ESD-Protected USB Transceivers (Maxim Integrated)
  • MAX3452E - ESD-Protected USB Transceivers (Maxim Integrated)
  • MAX3453E - ESD-Protected USB Transceivers (Maxim Integrated)
  • MAX3454E - ESD-Protected USB Transceivers (Maxim Integrated)
  • MAX3455E - ESD-Protected USB Transceivers (Maxim Integrated)
  • MAX3408 - 75/100/120 Switchable Termination Networks (Maxim)
  • MAX3430 - 80V Fault-Protected / Fail-Safe / 1/4-Unit Load / #.3V RS-485 Transceiver (Maxim)
  • MAX34408 - SMBus Dual/Quad Current Monitor (Maxim Integrated)
Other Datasheets by Maxim Integrated Products
  • MAX34565 - 12V Hot-Plug Switch
  • MAX345 - (MAX341 - MAX348) CMOS / DMOS Analog Switches
  • MAX3406 - (MAX3406 - MAX3408) Switchable Termination Networks
  • MAX3407 - (MAX3406 - MAX3408) Switchable Termination Networks
  • MAX341 - (MAX341 - MAX348) CMOS / DMOS Analog Switches
  • MAX3420E - USB Peripheral Controller
  • MAX3421E - USB Peripheral/Host Controller
  • MAX343 - (MAX341 - MAX348) CMOS / DMOS Analog Switches

Full PDF Text Transcription

Click to expand full text
www.DataSheet.co.kr 19-5621; Rev 0; 11/10 12V/5V Hot-Plug Switch General Description The MAX34561 is a dual, self-contained, hot-plug switch intended to be used on +12V and +5V power rails to limit through current and to control the power-up output-voltage ramp. The device contains two on-board n-channel power MOSFETs that are actively closed-loop controlled to ensure that an adjustable current limit is not exceeded. The maximum allowable current through the device is adjusted by external resistors connected between the LOAD and ILIM pins. The device can control the power-up output-voltage ramp. Capacitors connected to the VRAMP pins set the desired voltage-ramp rate. The output voltages are unconditionally clamped to keep input overvoltage stresses from harming the load.
Published: |