Datasheet4U Logo Datasheet4U.com

MAX3814 Datasheet DVI/HDMI TMDS FR-4 and Cable Equalizer/Driver

Manufacturer: Maxim Integrated (now Analog Devices)

📥 Download Datasheet

General Description

The MAX3814 TMDS® EQ/driver IC compensates for FR-4 and cable losses up to the DVI/HDMI transmit connector and provides a fully compliant DVI/HDMI TMDS output.

The device can also be used in DVI/HDMI cable applications to extend reach and improve jitter margin of cable channels at the receive-side connector.

The on-chip TMDS drivers operate at a standard current level for implementing a typical DVI/HDMI nonback-terminated transmitter, as well as a 50% higher current mode for using a 200Ω back termination resistor (nonmatching) to achieve a 10dB return loss.

Overview

19-0813; Rev 0; 5/07 KIT ATION EVALU E L B AVAILA www.DataSheet4U.

Key Features

  • Equalizes FR-4 Board Microstrip and Cable HF Losses Up to 15dB at 825MHz for Operation at 0.25Gbps to 1.65Gbps.
  • Compatible with HDMI 1.3.
  • Less Than 0.2UIP-P Residual Jitter at 1.65Gbps for 0 to 15dB Channel Loss at 825MHz.
  • Input Terminations: 50Ω (Each Side to VCC) ±10%.
  • Output of Driver is a Fully DVI/HDMI TMDSCompatible Cable Driver.
  • Output Amplitude: 1.05VP-P Differential.
  • Enable Pin to Select Normal Operation or PowerDown Mode.

More Datasheets from Maxim Integrated (now Analog Devices)

Part Number Description
MAX3815 TMDS Digital Video Equalizer
MAX3815A TMDS Digital Video Equalizer
MAX3806 Receiver
MAX3841 CML 2 x 2 Crosspoint Switch
MAX3845 DVI/HDMI 2:4 TMDS Fanout Switch and Cable Driver
MAX3863 2.7Gbps Laser Driver
MAX3875A Clock Recovery and Data Retiming IC
MAX3881 SDH/SONET 1:16 Deserializer
MAX3882 2.488Gbps/2.67Gbps 1:4 Demultiplexer
MAX3882A 2.488Gbps 1:4 Demultiplexer