Datasheet4U Logo Datasheet4U.com

MAX4827 - (MAX4826 - MAX4831) 50mA/100mA Current-Limit Switches

Download the MAX4827 datasheet PDF. This datasheet also covers the MAX4826 variant, as both devices belong to the same (max4826 - max4831) 50ma/100ma current-limit switches family and are provided as variant models within a single manufacturer datasheet.

Description

The MAX4826

MAX4831 family of switches has internal current limiting to prevent host devices from being damaged due to faulty load conditions.

These analog switches have a low 0.7Ω on-resistance and operate from a +2.3V to +5.5V input voltage range.

Features

  • Guaranteed Current Limit: 50mA, 100mA.
  • Thermal Shutdown Protection.
  • Reverse-Current Protection.
  • 0.7Ω On-Resistance (MAX4826.
  • MAX4831).
  • 14ms Guaranteed Blanking Time.
  • Fault Flag (FFLG).
  • No-Load Flag (NOLD).
  • 65µA Supply Current.
  • 8µA Latch-Off Current.
  • 0.01µA Shutdown Current.
  • +2.3V to +5.5V Supply Range.
  • Undervoltage Lockout.
  • Fast Current-Limit Response Time.
  • 6-Pin.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX4826_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4820 +3.3V/+5V / 8-Channel / Cascadable Relay Drivers Maxim
MAX4821 +3.3V/+5V / 8-Channel / Cascadable Relay Drivers Maxim
MAX480 High-Precision / Low-Voltage / Micropower Op Amp Maxim
MAX4805 Low-Noise Operational Amplifiers Maxim Integrated
MAX4805A Low-Noise Operational Amplifiers Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX4822 (MAX4822 - MAX4825) 8-Channel Relay Drivers
MAX4823 (MAX4822 - MAX4825) 8-Channel Relay Drivers
MAX4824 (MAX4822 - MAX4825) 8-Channel Relay Drivers
MAX4825 (MAX4822 - MAX4825) 8-Channel Relay Drivers
MAX4826 (MAX4826 - MAX4831) 50mA/100mA Current-Limit Switches

Full PDF Text Transcription

Click to expand full text
19-3672; Rev 0; 5/05 50mA/100mA Current-Limit Switches with NO-LOAD Flag in µDFN General Description The MAX4826–MAX4831 family of switches has internal current limiting to prevent host devices from being damaged due to faulty load conditions. These analog switches have a low 0.7Ω on-resistance and operate from a +2.3V to +5.5V input voltage range. These devices are available with guaranteed 50mA and 100mA current limits, making them ideal for loadswitching applications. In addition to the current-limit fault flag (FFLG), an open-drain no-load flag indicator (NOLD) notifies the system when the current through the switch is less than 10mA (MAX4826–MAX4829), or 5mA (MAX4830/MAX4831).
Published: |