Datasheet4U Logo Datasheet4U.com

MAX5054 - 4A 20ns Dual MOSFET Drivers

Description

The MAX5054

MAX5057 dual, high-speed MOSFET drivers source and sink up to 4A peak current.

These devices feature a fast 20ns propagation delay and 20ns rise and fall times while driving a 5000pF capacitive load.

Features

  • MAX5054.
  • MAX5057 Ordering Information PART MAX5054AATA MAX5054BATA MAX5055AASA MAX5055BASA MAX5056AASA MAX5056BASA MAX5057AASA MAX5057BASA TEMP RANGE -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C.

📥 Download Datasheet

Datasheet preview – MAX5054

📁 Similar Datasheet

  • MAX505 - Quad 8-Bit DACs with Rail-to-Rail Voltage Outputs (Maxim)
  • MAX500 - CMOS / Quad / Serial-Interface 8-Bit DAC (Maxim)
  • MAX5003 - High-Voltage PWM Power-Supply Controller (Maxim)
  • MAX501 - Voltage-Output / 12-Bit Multiplying DACs (Maxim)
  • MAX5012 - 12-Bit / 100Msps ECL DAC (Maxim)
  • MAX5013 - 12-Bit / 100Msps TTL DAC (Maxim)
  • MAX5014 - Current-Mode PWM Controllers (Maxim Integrated)
  • MAX5015 - Current-Mode PWM Controllers (Maxim Integrated)
  • MAX5018 - 8-Bit / High-Speed DAC (Maxim)
  • MAX5019 - Current-Mode PWM Controllers with Integrated Startup Circuit (Maxim)
Other Datasheets by Maxim Integrated Products
  • MAX5051 - Parallelable Clamped Two-Switch Power-Supply Controller IC
  • MAX5052 - Current-Mode PWM Controllers
  • MAX5053 - Current-Mode PWM Controllers
  • MAX5055 - 4A 20ns Dual MOSFET Drivers
  • MAX5056 - 4A 20ns Dual MOSFET Drivers
  • MAX5057 - 4A 20ns Dual MOSFET Drivers
  • MAX5058 - Parallelable Secondary-Side Synchronous Rectifier Driver and Feedback-Generator Controller ICs
  • MAX5059 - Parallelable Secondary-Side Synchronous Rectifier Driver and Feedback-Generator Controller ICs

Full PDF Text Transcription

Click to expand full text
19-3348; Rev 0; 8/04 www.DataSheet4U.com 4A, 20ns, Dual MOSFET Drivers General Description The MAX5054–MAX5057 dual, high-speed MOSFET drivers source and sink up to 4A peak current. These devices feature a fast 20ns propagation delay and 20ns rise and fall times while driving a 5000pF capacitive load. Propagation delay time is minimized and matched between the inverting and noninverting inputs and between channels. High sourcing/sinking peak currents, low propagation delay, and thermally enhanced packages make the MAX5054–MAX5057 ideal for highfrequency and high-power circuits. The MAX5054–MAX5057 operate from a 4V to 15V single power supply and consume 40µA (typ) of supply current when not switching.
Published: |